Will “Environmental Remediation Engineer” be Replaced By Robots? 🤔
1.8% Chance of Automation
“Environmental Remediation Engineer” will not be replaced by robots.
This job is ranked #81 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, plan, or perform engineering duties in the prevention, control, and remediation of environmental hazards using various engineering disciplines. Work may include waste treatment, site remediation, or pollution control technology.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2081.00
- The Mean Annual Wage in the U.S. is $ 88,530.00
- The Mean Hourly Wage is $ 42.00
- Currently, there are 52,280 people on this job
☝️ Information based on the reference occupation “Environmental Engineers”.
Also Known As…
- Environmental Engineers
- Sanitary Engineer
- Regulatory Environmental Compliance Manager
- Marine Engineer CPVEC (Marine Engineer Commercial Passenger Vessel Environmental Compliance)
- Hazardous Substances Engineer
- Global Director Air and Climate Change
- Environmental Remediation Specialist
- Environmental Engineer
- Environmental Analyst
- Chief, Pesticides and Toxic Substances Branch
- Air Pollution Control Engineer
- Water Treatment Plant Engineer
- Water Supply Engineer
- Water Resources Engineer
- Wastewater Treatment Engineer
- Waste Management Engineer
- Solid Waste Management Engineer
- Solid Waste Engineer
- Soil Engineer
- Sewage Disposal Engineer
- Sanitation Engineer
- Reservoir Engineer
- Remediation Project Engineer
- Radiation Protection Engineer
- Public Health Engineer
- Project Manager
- Project Engineer
- Pollution Control Engineer
- Irrigation Engineer
- Industrial Hygiene Engineer
- Hazardous Waste Management Specialist
- Hazardous Waste Management Control Engineer
- Flood Control Engineer
- Environmentalist
- Environmental Systems Coordinator
- Environmental Scientist
- Environmental Safety Specialist
- Environmental Project Manager
- Environmental Planner
- Environmental Designer
- Environmental Coordinator
- Environmental Consultant
Tasks for “Environmental Remediation Engineer”
- Monitor progress of environmental improvement programs.
- Develop or present environmental compliance training or orientation sessions.
- Obtain, update, or maintain plans, permits, or standard operating procedures.
- Assess the existing or potential environmental impact of land use projects on air, water, or land.
- Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
- Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
- Prepare hazardous waste manifests or land disposal restriction notifications.
- Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
- Inform company employees or other interested parties of environmental issues.
- Develop, implement, or manage plans or programs related to conservation or management of natural resources.
- Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
- Design or supervise the design of systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
- Write reports or articles for Web sites or newsletters related to environmental engineering issues.
- Prepare, maintain, or revise quality assurance documentation or procedures.
- Advise industries or government agencies about environmental policies and standards.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
- Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
- Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
- Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
- Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
- Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
- Request bids from suppliers or consultants.
- Assess, sort, characterize, or pack known or unknown materials.
- Assist in budget implementation, forecasts, or administration.
- Prepare, review, or update environmental investigation or recommendation reports.
- Prepare or present public briefings on the status of environmental engineering projects.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
Related Technology & Tools
- Liquid scintillation counters
- Sampling trains
- Seismographs
- Thermal conductivity detectors
- Capillary electrophoresis systems
- Flame emission detectors
- Trace metal analyzers
- Microwave digestion instruments
- Soil modulus failure testing devices
- Organic carbon analyzers
- Headspace autosamplers
- Ambient air measurement devices
- Desktop computers
- Geoprobes
- Flow meters
- Nitrogen oxide burners
- Whole air canisters
- Sorbent tubes
- Individual burner air measurement IBAM probes
- Interferometeric refractormeters
- Biological oxidizers
- Plasma-mass spectrometers
- Air velocity meters
- Combustible gas meters
- Scanning potentiostats
- Atomic absorption AA spectrophotometers
- Sample concentrators
- Mass spectrometers
- Conductivity meters
- Autoclaves
- Limnological core loggers
- Spectrophotometers
- Stormwater samplers
- Shakers
- Balances
- Freeze dryers
- Nutrient analyzers
- Solid shear failure testing devices
- Fluorescence detectors
- Anaerobic growth chambers
- Flame ionization detectors FID
- Supercritical fluid extractors
- Glove box systems
- Thermal/catalytic oxidizers TCO
- Hydrological current meters
- Graphite furnaces
- pH meters
- Laser photometers
- Surface area analyzers
- Mud rotary drills
- Global positioning system GPS receivers
- Atomic absorption AA spectrometers
- Automatic titrators
- Wave gauges
- Ion chromatographs
- Fume hoods
- Multi gas detector tubes
- Soil electrical conductivity measurement devices
- Direct shear testing devices
- Charge-coupled device CCD cameras
- Colorimeters
- Respirometers
- Centrifuges
- Ultraviolet water purification systems
- Chemostats
- Total organic carbon TOC analyzers
- Air incubators
- Incubators
- Dissolved oxygen meters
- Ultraviolet UV light detectors
- Particle counters
- California bearing ratio CBR testing devices
- Limnological coring drills
- Laboratory ovens
- Pitot tubes
- Liquid ring pumps
- Multiparameter water quality instruments
- Fluorescence spectrophotometers
- Electron capture detectors ECD
- Notebook computers
- Microbics toxicity analyzers
- Gas meters
- Core drill rigs
- Sampling pumps
- Liquid chromatography detectors
- Electric pumps
- Soil-erodability testing devices
- Water level recorders
- Thermocouples
- Luminometers
- Ozonators
- Stem augers
- Soil carbon-nitrogen CN analyzers
- Photometers
- Epifluorescence microscopes
- Environmental probe systems
- Particulate filters
- Argon ionization detectors
- Universal fractionators
- Mercury/hybrid atomizers
- Consolidometers
- Gas chromatographs GC
- ESRI ArcView
- Finite element method FEM software
- C++
- Oil mapping software
- Material safety data sheet MSDS software
- Microsoft PowerPoint
- Image analysis software
- WAM software
- Stormwater runoff modeling software
- Microsoft Project
- Greenhouse gas management software
- XP Software XPSWMM
- Microsoft Excel
- Continuous emission management software
- Geomechanical design analysis GDA software
- Insightful S-PLUS
- Water flow modeling software
- Hazardous materials management HMS software
- Microsoft Office
- ESRI ArcGIS software
- Autodesk AutoCAD Civil 3D
- DHI Water and Environment MIKE SHE
- Simultaneous location and mapping SLAM
- HEC RAS
- Microsoft Access
- Bentley Microstation
- Rockwell Automation Arena
- RockWare MODFLOW
- Gas dispersion model software
- Formula translation/translator FORTRAN
- Autodesk AutoCAD
- Photogrammetric software
- LINDO
- Air dispersion modeling software
- Python
- Site remediation management software
- Hydrologic simulation program fortan HSPF software
- Environmental health and safety documentation software
- Ecological risk assessment software
- Regulatory compliance management software
- Computer aided design and drafting software CADD
- Wind flow modeling software
- Simulation software
- Fugitive emission leak detection software
- Computer aided design CAD software
- Maplesoft Maple
- Waste management software
- SofTech CADRA
- Microsoft Word
- SAS
- The MathWorks MATLAB
- ANSYS