Will “Boiler Plant Operator” be Replaced By Robots? 🤔

89% Chance of Automation

“Boiler Plant Operator” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Boiler Plant Operator”

Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Develop operation, safety, and maintenance procedures or assist in their development.
Receive instructions from steam engineers regarding steam plant and air compressor operations.
Investigate and report on accidents.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Install burners and auxiliary equipment, using hand tools.
Operate mechanical hoppers and provide assistance in their adjustment and repair.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Weigh, measure, and record fuel used.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Ignite fuel in burners, using torches or flames.
Test electrical systems to determine voltages, using voltage meters.

Related Technology & Tools

Amp meters
Industrial platform scales
Phillips head screwdrivers
Drill presses
Bench lathes
Safety glasses
Filter masks
Pneumatic pumps
Scaffolding
Combustion analyzers
Power meters
Electronic temperature sensors
Safety gloves
Equipment cleaning scrapers
Turbidimeters
Dial calipers
Sling psychrometers
Adjustable wrenches
Precision levels
Hydrometers
Rotary hammers
Conductivity meters
pH indicators
Protective ear plugs
Layout squares
Pressure gauges
Grapple cranes
Metal cutting dies
Electronic remote reading thermometers
Straight screwdrivers
Micrometers
Self-contained breathing apparatus
Hydraulic press frames
Ohmmeters
Dropping pipettes
Steam cleaning equipment
Dial indicators
Grease guns
Pipe wrenches
Metal cutting taps
Hand pipe threaders
Locking pliers
Personal computers
Thermocouples
Forklifts
Opacity meters
Pipe cutters
Programmable logic controllers PLC
Claw hammers
Electric drain augers
Ladders
Colorimeters
Water column gauges
Sandblasters
Bourdon tubes
Shielded arc welding tools
Graduated glass cylinders
Voltmeters
Manifold test gauges
Socket wrench sets
Power saws
Two way radios
Tapping machines
Descalers
Power drills
Hydraulic boom trucks
Oil guns
Gas brazing equipment
Ratchets
Digital multimeters
Infrared guns
Pressure transmitters
Oxyacetylene welding equipment

Microsoft Word
Web browser software
Building management system software
Database software
Microsoft Office
Word processing software
Data entry software
Computerized maintenance management system CMMS
Microsoft Excel
Spreadsheet software
Graphics software
Email software
Statistical software