Will “Plugman” be Replaced By Robots? 🤔

89% Chance of Automation

“Plugman” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Plugman”

Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Investigate and report on accidents.
Ignite fuel in burners, using torches or flames.
Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Receive instructions from steam engineers regarding steam plant and air compressor operations.
Weigh, measure, and record fuel used.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Test electrical systems to determine voltages, using voltage meters.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Operate mechanical hoppers and provide assistance in their adjustment and repair.
Install burners and auxiliary equipment, using hand tools.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Develop operation, safety, and maintenance procedures or assist in their development.

Related Technology & Tools

Conductivity meters
Colorimeters
Grease guns
Grapple cranes
Layout squares
Pipe wrenches
Steam cleaning equipment
Hydraulic press frames
Rotary hammers
Adjustable wrenches
Industrial platform scales
Socket wrench sets
Electronic remote reading thermometers
Bourdon tubes
Pressure transmitters
Oil guns
Dropping pipettes
Pneumatic pumps
Drill presses
Power saws
Hand pipe threaders
Amp meters
Manifold test gauges
Graduated glass cylinders
Sandblasters
Claw hammers
Gas brazing equipment
Hydraulic boom trucks
Power drills
Ratchets
Dial indicators
Personal computers
Oxyacetylene welding equipment
Turbidimeters
Sling psychrometers
Self-contained breathing apparatus
Filter masks
Thermocouples
Equipment cleaning scrapers
Micrometers
Safety gloves
Descalers
Dial calipers
Ohmmeters
Voltmeters
Hydrometers
Protective ear plugs
Precision levels
Bench lathes
Two way radios
Locking pliers
pH indicators
Tapping machines
Digital multimeters
Opacity meters
Programmable logic controllers PLC
Water column gauges
Electronic temperature sensors
Scaffolding
Pipe cutters
Metal cutting dies
Ladders
Combustion analyzers
Straight screwdrivers
Power meters
Pressure gauges
Safety glasses
Electric drain augers
Infrared guns
Metal cutting taps
Phillips head screwdrivers
Forklifts
Shielded arc welding tools

Data entry software
Database software
Computerized maintenance management system CMMS
Microsoft Excel
Microsoft Office
Microsoft Word
Email software
Word processing software
Building management system software
Web browser software
Graphics software
Statistical software
Spreadsheet software