Will “Power Operator” be Replaced By Robots? 🤔

89% Chance of Automation

“Power Operator” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Power Operator”

Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Develop operation, safety, and maintenance procedures or assist in their development.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Weigh, measure, and record fuel used.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Test electrical systems to determine voltages, using voltage meters.
Ignite fuel in burners, using torches or flames.
Investigate and report on accidents.
Install burners and auxiliary equipment, using hand tools.
Operate mechanical hoppers and provide assistance in their adjustment and repair.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
Receive instructions from steam engineers regarding steam plant and air compressor operations.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.

Related Technology & Tools

Industrial platform scales
Personal computers
Gas brazing equipment
Programmable logic controllers PLC
Two way radios
Precision levels
Claw hammers
Adjustable wrenches
Layout squares
Socket wrench sets
Straight screwdrivers
Bourdon tubes
Conductivity meters
Dropping pipettes
Equipment cleaning scrapers
pH indicators
Grapple cranes
Scaffolding
Ohmmeters
Colorimeters
Water column gauges
Hydrometers
Turbidimeters
Dial calipers
Micrometers
Steam cleaning equipment
Amp meters
Rotary hammers
Phillips head screwdrivers
Safety gloves
Infrared guns
Locking pliers
Electronic temperature sensors
Power meters
Pressure transmitters
Thermocouples
Ratchets
Power drills
Graduated glass cylinders
Ladders
Hydraulic press frames
Drill presses
Metal cutting taps
Power saws
Manifold test gauges
Safety glasses
Metal cutting dies
Tapping machines
Dial indicators
Shielded arc welding tools
Pressure gauges
Oil guns
Electronic remote reading thermometers
Combustion analyzers
Grease guns
Electric drain augers
Voltmeters
Pipe wrenches
Filter masks
Hand pipe threaders
Pipe cutters
Oxyacetylene welding equipment
Bench lathes
Descalers
Sling psychrometers
Forklifts
Sandblasters
Self-contained breathing apparatus
Digital multimeters
Hydraulic boom trucks
Opacity meters
Protective ear plugs
Pneumatic pumps

Microsoft Excel
Word processing software
Statistical software
Computerized maintenance management system CMMS
Building management system software
Graphics software
Spreadsheet software
Microsoft Word
Data entry software
Email software
Database software
Web browser software
Microsoft Office