Will “Retort Firer” be Replaced By Robots? 🤔

89% Chance of Automation

“Retort Firer” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Retort Firer”

Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
Operate mechanical hoppers and provide assistance in their adjustment and repair.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Ignite fuel in burners, using torches or flames.
Investigate and report on accidents.
Test electrical systems to determine voltages, using voltage meters.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Install burners and auxiliary equipment, using hand tools.
Weigh, measure, and record fuel used.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Develop operation, safety, and maintenance procedures or assist in their development.
Receive instructions from steam engineers regarding steam plant and air compressor operations.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.

Related Technology & Tools

Locking pliers
Amp meters
Scaffolding
Safety glasses
Pressure gauges
Voltmeters
Drill presses
Bench lathes
Safety gloves
Hydraulic boom trucks
Power meters
Power drills
Combustion analyzers
Claw hammers
Infrared guns
Sling psychrometers
Equipment cleaning scrapers
Dropping pipettes
Grease guns
Oil guns
pH indicators
Conductivity meters
Gas brazing equipment
Industrial platform scales
Grapple cranes
Socket wrench sets
Adjustable wrenches
Filter masks
Hydrometers
Straight screwdrivers
Tapping machines
Ratchets
Precision levels
Graduated glass cylinders
Hydraulic press frames
Pipe cutters
Hand pipe threaders
Turbidimeters
Thermocouples
Programmable logic controllers PLC
Forklifts
Colorimeters
Two way radios
Steam cleaning equipment
Protective ear plugs
Shielded arc welding tools
Layout squares
Electric drain augers
Rotary hammers
Electronic temperature sensors
Phillips head screwdrivers
Bourdon tubes
Opacity meters
Sandblasters
Ladders
Pipe wrenches
Micrometers
Self-contained breathing apparatus
Oxyacetylene welding equipment
Pneumatic pumps
Descalers
Metal cutting taps
Pressure transmitters
Metal cutting dies
Ohmmeters
Digital multimeters
Dial indicators
Manifold test gauges
Personal computers
Water column gauges
Electronic remote reading thermometers
Power saws
Dial calipers

Database software
Web browser software
Computerized maintenance management system CMMS
Spreadsheet software
Statistical software
Building management system software
Data entry software
Email software
Microsoft Office
Microsoft Word
Graphics software
Word processing software
Microsoft Excel