Will “Production Supply Equipment Tender” be Replaced By Robots? 🤔
93% Chance of Automation
“Production Supply Equipment Tender” will almost certainly be replaced by robots.
This job is ranked #577 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Control or tend conveyors or conveyor systems that move materials or products to and from stockpiles, processing stations, departments, or vehicles. May control speed and routing of materials or products.
Job Details
- The SOC (Standard Occupational Classification) code is 53-7011.00
- The Mean Annual Wage in the U.S. is $ 33,870.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 28,590 people on this job
☝️ Information based on the reference occupation “Conveyor Operators and Tenders”.
Also Known As…
- Conveyor Operators and Tenders
- Process Operator
- Process Line Operator
- Press Operator
- Packing Line Operator
- Debarker Operator
- Chipper Operator
- Chain Puller
- Cartoner Operator
- Bander
- Assembly Line Tender
- Unscrambler
- Trolley Operator
- Transfer Operator
- Tipple Tender
- Tipple Operator
- Tip-Out Worker
- Stacker Tender
- Spout Tender
- Sinter Feeder
- Silo Tender
- Silo Operator
- Profinish Line Helper
- Production Line Technician
- Pneumatic System Conveyor Operator
- Palletizer Operator
- Operator
- Milled Rubber Tender
- Meal Loader
- Material Handler
- Log Sorter Operator
- Grain Loader
- Grain Elevator Operator
- Fruit Distributor
- Forklift Operator
- Finishing Tracker
- Extraction Operator
- Elevator Operator
- Dryer Operator
- Drier Take-Off Tender
- Denester Operator
- Cooker Loader
- Conveyor Tender
- Conveyor Technician
- Conveyor System Operator
- Conveyor System Dispatcher
- Conveyor Console Operator
- Conveyor Belt Operator
- Conveyor Attendant
- Console Attendant
- Coke Loader
- Chip Unloader
- Chip Loft Worker
- Chip Bin Operator
- Chip Bin Conveyor Tender
- Char Conveyor Tender
- Cement Loader
- Bull-Chain Operator
- Brick Unloader Tender
- Break Down Operator
- Boom Conveyor Operator
- Bin Tripper Operator
- Beltman
- Belt Tender
- Belt Operator
- Bed Operator
- Bark Belt Operator
- Ash Conveyor Operator
- Aerial Tram Operator
Tasks for “Production Supply Equipment Tender”
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Operate consoles to control automatic palletizing equipment.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Observe packages moving along conveyors in order to identify packages and to detect defective packaging.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Operate elevator systems in conjunction with conveyor systems.
Related Technology & Tools
- Digital video cameras
- Protective safety glasses
- Pickup trucks
- Strapping tools
- Mobile radios
- Screw conveyors
- Grease dispensing guns
- Portable power saws
- Spot welders
- Vibrating conveyors
- Automobiles
- Digital floor scales
- Belt conveyors systems
- Sump pumps
- Laser facsimile machines
- Handheld scanners
- Elevator systems
- Wheeled forklifts
- Chain conveyor systems
- Pallet jacks
- Electric hoists
- Scoops
- Gate pumps
- Oil dispensing cans
- Hoppers
- Hydraulic booms
- Light industrial vans
- Grain conveyors
- Precision rulers
- Safety gloves
- Watering hoses
- Automatic palletizing equipment
- Boom conveyors
- Desktop computers
- Hydraulic lifts
- Hearing protection plugs
- Intelligrated InControlWare
- Control system software
- Data entry software
- Sortation software
- Microsoft Windows
- Conveyor control software