Will “Conveyor Operators and Tenders” be Replaced By Robots? 🤔
93% Chance of Automation
“Conveyor Operators and Tenders” will almost certainly be replaced by robots.
This job is ranked #577 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Control or tend conveyors or conveyor systems that move materials or products to and from stockpiles, processing stations, departments, or vehicles. May control speed and routing of materials or products.
Job Details
- The SOC (Standard Occupational Classification) code is 53-7011.00
- The Mean Annual Wage in the U.S. is $ 33,870.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 28,590 people on this job
Also Known As…
- Process Operator
- Process Line Operator
- Press Operator
- Packing Line Operator
- Debarker Operator
- Chipper Operator
- Chain Puller
- Cartoner Operator
- Bander
- Assembly Line Tender
- Unscrambler
- Trolley Operator
- Transfer Operator
- Tipple Tender
- Tipple Operator
- Tip-Out Worker
- Stacker Tender
- Spout Tender
- Sinter Feeder
- Silo Tender
- Silo Operator
- Profinish Line Helper
- Production Supply Equipment Tender
- Production Line Technician
- Pneumatic System Conveyor Operator
- Palletizer Operator
- Operator
- Milled Rubber Tender
- Meal Loader
- Material Handler
- Log Sorter Operator
- Grain Loader
- Grain Elevator Operator
- Fruit Distributor
- Forklift Operator
- Finishing Tracker
- Extraction Operator
- Elevator Operator
- Dryer Operator
- Drier Take-Off Tender
- Denester Operator
- Cooker Loader
- Conveyor Tender
- Conveyor Technician
- Conveyor System Operator
- Conveyor System Dispatcher
- Conveyor Console Operator
- Conveyor Belt Operator
- Conveyor Attendant
- Console Attendant
- Coke Loader
- Chip Unloader
- Chip Loft Worker
- Chip Bin Operator
- Chip Bin Conveyor Tender
- Char Conveyor Tender
- Cement Loader
- Bull-Chain Operator
- Brick Unloader Tender
- Break Down Operator
- Boom Conveyor Operator
- Bin Tripper Operator
- Beltman
- Belt Tender
- Belt Operator
- Bed Operator
- Bark Belt Operator
- Ash Conveyor Operator
- Aerial Tram Operator
Tasks for “Conveyor Operators and Tenders”
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Observe packages moving along conveyors in order to identify packages and to detect defective packaging.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Operate consoles to control automatic palletizing equipment.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Operate elevator systems in conjunction with conveyor systems.
Related Technology & Tools
- Automatic palletizing equipment
- Handheld scanners
- Elevator systems
- Sump pumps
- Hydraulic lifts
- Watering hoses
- Scoops
- Digital video cameras
- Wheeled forklifts
- Strapping tools
- Mobile radios
- Automobiles
- Safety gloves
- Vibrating conveyors
- Desktop computers
- Belt conveyors systems
- Light industrial vans
- Grease dispensing guns
- Hoppers
- Protective safety glasses
- Screw conveyors
- Hydraulic booms
- Laser facsimile machines
- Oil dispensing cans
- Precision rulers
- Spot welders
- Pallet jacks
- Electric hoists
- Digital floor scales
- Portable power saws
- Chain conveyor systems
- Boom conveyors
- Grain conveyors
- Hearing protection plugs
- Pickup trucks
- Gate pumps
- Intelligrated InControlWare
- Data entry software
- Microsoft Windows
- Control system software
- Conveyor control software
- Sortation software