Will “Chain Puller” be Replaced By Robots? 🤔
93% Chance of Automation
“Chain Puller” will almost certainly be replaced by robots.
This job is ranked #577 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Control or tend conveyors or conveyor systems that move materials or products to and from stockpiles, processing stations, departments, or vehicles. May control speed and routing of materials or products.
Job Details
- The SOC (Standard Occupational Classification) code is 53-7011.00
- The Mean Annual Wage in the U.S. is $ 33,870.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 28,590 people on this job
☝️ Information based on the reference occupation “Conveyor Operators and Tenders”.
Also Known As…
- Conveyor Operators and Tenders
- Process Operator
- Process Line Operator
- Press Operator
- Packing Line Operator
- Debarker Operator
- Chipper Operator
- Cartoner Operator
- Bander
- Assembly Line Tender
- Unscrambler
- Trolley Operator
- Transfer Operator
- Tipple Tender
- Tipple Operator
- Tip-Out Worker
- Stacker Tender
- Spout Tender
- Sinter Feeder
- Silo Tender
- Silo Operator
- Profinish Line Helper
- Production Supply Equipment Tender
- Production Line Technician
- Pneumatic System Conveyor Operator
- Palletizer Operator
- Operator
- Milled Rubber Tender
- Meal Loader
- Material Handler
- Log Sorter Operator
- Grain Loader
- Grain Elevator Operator
- Fruit Distributor
- Forklift Operator
- Finishing Tracker
- Extraction Operator
- Elevator Operator
- Dryer Operator
- Drier Take-Off Tender
- Denester Operator
- Cooker Loader
- Conveyor Tender
- Conveyor Technician
- Conveyor System Operator
- Conveyor System Dispatcher
- Conveyor Console Operator
- Conveyor Belt Operator
- Conveyor Attendant
- Console Attendant
- Coke Loader
- Chip Unloader
- Chip Loft Worker
- Chip Bin Operator
- Chip Bin Conveyor Tender
- Char Conveyor Tender
- Chain Puller
- Cement Loader
- Bull-Chain Operator
- Brick Unloader Tender
- Break Down Operator
- Boom Conveyor Operator
- Bin Tripper Operator
- Beltman
- Belt Tender
- Belt Operator
- Bed Operator
- Bark Belt Operator
- Ash Conveyor Operator
- Aerial Tram Operator
Tasks for “Chain Puller”
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Operate elevator systems in conjunction with conveyor systems.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe packages moving along conveyors in order to identify packages and to detect defective packaging.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Operate consoles to control automatic palletizing equipment.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
Related Technology & Tools
- Pallet jacks
- Oil dispensing cans
- Chain conveyor systems
- Vibrating conveyors
- Desktop computers
- Hearing protection plugs
- Electric hoists
- Protective safety glasses
- Strapping tools
- Automobiles
- Screw conveyors
- Grease dispensing guns
- Pickup trucks
- Hoppers
- Laser facsimile machines
- Mobile radios
- Handheld scanners
- Digital video cameras
- Precision rulers
- Boom conveyors
- Hydraulic lifts
- Scoops
- Hydraulic booms
- Spot welders
- Grain conveyors
- Automatic palletizing equipment
- Wheeled forklifts
- Elevator systems
- Light industrial vans
- Gate pumps
- Portable power saws
- Watering hoses
- Belt conveyors systems
- Safety gloves
- Sump pumps
- Digital floor scales
- Intelligrated InControlWare
- Sortation software
- Microsoft Windows
- Conveyor control software
- Data entry software
- Control system software