Will “Bander” be Replaced By Robots? 🤔
93% Chance of Automation
“Bander” will almost certainly be replaced by robots.
This job is ranked #577 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Control or tend conveyors or conveyor systems that move materials or products to and from stockpiles, processing stations, departments, or vehicles. May control speed and routing of materials or products.
Job Details
- The SOC (Standard Occupational Classification) code is 53-7011.00
- The Mean Annual Wage in the U.S. is $ 33,870.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 28,590 people on this job
☝️ Information based on the reference occupation “Conveyor Operators and Tenders”.
Also Known As…
- Conveyor Operators and Tenders
- Process Operator
- Process Line Operator
- Press Operator
- Packing Line Operator
- Debarker Operator
- Chipper Operator
- Chain Puller
- Cartoner Operator
- Assembly Line Tender
- Unscrambler
- Trolley Operator
- Transfer Operator
- Tipple Tender
- Tipple Operator
- Tip-Out Worker
- Stacker Tender
- Spout Tender
- Sinter Feeder
- Silo Tender
- Silo Operator
- Profinish Line Helper
- Production Supply Equipment Tender
- Production Line Technician
- Pneumatic System Conveyor Operator
- Palletizer Operator
- Operator
- Milled Rubber Tender
- Meal Loader
- Material Handler
- Log Sorter Operator
- Grain Loader
- Grain Elevator Operator
- Fruit Distributor
- Forklift Operator
- Finishing Tracker
- Extraction Operator
- Elevator Operator
- Dryer Operator
- Drier Take-Off Tender
- Denester Operator
- Cooker Loader
- Conveyor Tender
- Conveyor Technician
- Conveyor System Operator
- Conveyor System Dispatcher
- Conveyor Console Operator
- Conveyor Belt Operator
- Conveyor Attendant
- Console Attendant
- Coke Loader
- Chip Unloader
- Chip Loft Worker
- Chip Bin Operator
- Chip Bin Conveyor Tender
- Char Conveyor Tender
- Cement Loader
- Bull-Chain Operator
- Brick Unloader Tender
- Break Down Operator
- Boom Conveyor Operator
- Bin Tripper Operator
- Beltman
- Belt Tender
- Belt Operator
- Bed Operator
- Bark Belt Operator
- Bander
- Ash Conveyor Operator
- Aerial Tram Operator
Tasks for “Bander”
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Operate consoles to control automatic palletizing equipment.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Measure dimensions of bundles, using rulers, and cut battens to required sizes, using power saws.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Affix identifying information to materials or products, using hand tools.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe packages moving along conveyors in order to identify packages and to detect defective packaging.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Operate elevator systems in conjunction with conveyor systems.
Related Technology & Tools
- Desktop computers
- Grease dispensing guns
- Boom conveyors
- Oil dispensing cans
- Protective safety glasses
- Wheeled forklifts
- Belt conveyors systems
- Hydraulic booms
- Automatic palletizing equipment
- Automobiles
- Hydraulic lifts
- Gate pumps
- Digital video cameras
- Pickup trucks
- Handheld scanners
- Portable power saws
- Hoppers
- Chain conveyor systems
- Mobile radios
- Scoops
- Strapping tools
- Light industrial vans
- Safety gloves
- Grain conveyors
- Sump pumps
- Elevator systems
- Spot welders
- Electric hoists
- Laser facsimile machines
- Precision rulers
- Vibrating conveyors
- Digital floor scales
- Pallet jacks
- Screw conveyors
- Watering hoses
- Hearing protection plugs
- Conveyor control software
- Data entry software
- Intelligrated InControlWare
- Sortation software
- Microsoft Windows
- Control system software