Will “Communications Engineer” be Replaced By Robots? 🤔
2.5% Chance of Automation
“Communications Engineer” will not be replaced by robots.
This job is ranked #98 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, develop, or test electronic components and systems for commercial, industrial, military, or scientific use employing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2072.00
- The Mean Annual Wage in the U.S. is $ 103,760.00
- The Mean Hourly Wage is $ 49.00
- Currently, there are 132,100 people on this job
☝️ Information based on the reference occupation “Electronics Engineers, Except Computer”.
Also Known As…
- Electronics Engineers, Except Computer
- Test Engineering Manager
- Test Engineer
- Research and Development Engineer (R&D Engineer)
- Radio Frequency Engineer (RF Engineer)
- Product Engineer
- Integrated Circuit Design Engineer (IC Design Engineer)
- Evaluation Engineer
- Engineering Manager
- Electronics Design Engineer
- Design Engineer
- Transmitter Engineer
- Transmission and Protection Engineer
- Traffic Circuit Engineer
- Telecommunications Engineer
- Telecommunication Engineer
- Systems Engineer
- Supplier Quality Engineer (SQE)
- Studio Operations Engineer-in-Charge
- Radio Frequency Design Engineer (RF Design Engineer)
- Radar Engineer
- Principal Engineer
- Outside Plant Engineer
- Outside Plant Cable Engineer
- Nanotechnologist
- Microwave Supervisor
- Microwave Engineer
- Guidance and Control System Engineer
- Failure Analysis Technician
- Equipment Engineer
- Electrophonic Engineer
- Electronics Test Engineer
- Electronics Research Engineer
- Electronics Engineer
- Electronic System Engineer
- Electronic Parts Designer
- Electrical Electronics Engineers
- Electrical Design Engineer
- Dial Equipment Engineer
- Customer Equipment Engineer
- Compatibility Test Engineer
- Commercial Engineer
- Circuit Designer
- Circuit Design Engineer
- Central Office Facilities Planning Engineer
- Central Office Equipment Engineer
- Automotive Power Electronics Engineer
- Automation Engineer
Tasks for “Communications Engineer”
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Develop solar photovoltaic products, such as inverters or energy management systems.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Determine project material or equipment needs.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
Related Technology & Tools
- Electronics probes
- Microprocessors
- Inductance capacitance resistance LCR meters
- Multimeters
- Wattmeters
- Communication bus analyzers
- Function generators
- Personal computers
- Photometers
- Wave meters
- Desktop computers
- Electronics counters
- High-power pulsed lasers
- Oscilloscopes
- Logic analyzers
- Programmable logic controllers PLC
- Microsoft Office
- Extensible markup language XML
- Cadence PSpice
- Oracle Java
- IBM Lotus Notes
- National Instruments LabVIEW
- Microsoft Word
- Microsoft Visual Basic.NET
- McCabe Software TRUEchange
- Ansoft Simplorer
- Two-dimensional 2D computer aided design CAD software
- Mathsoft Mathcad
- Assembler
- Hewlett-Packard HP OpenVMS
- Oracle DBMS
- Embarcadero Delphi
- Rabbit Semiconductor Dynamic C
- Microsoft Visual C# .NET
- Linux
- OrCAD Capture
- Microsoft PowerPoint
- Dassault Systemes CATIA
- Microsoft Excel
- Python
- The MathWorks Simulink
- Synopsys Saber
- Mentor Graphics PADS
- Graphics software
- Formula translation/translator FORTRAN
- The MathWorks MATLAB
- Very high-speed integrated circuit VHSIC hardware description language VHDL
- C
- Verilog
- C++
- UNIX
- Web browser software
- Agile Product Lifecyle Management PLM
- Visual Numerics PV-WAVE
- Autodesk AutoCAD
- Three-dimensional 3D computer aided design CAD software
- Real time operating system RTOS software
- Structured query language SQL
- ESRI ArcGIS software
- Xilinx Integrated Software Environment ISE
- Dassault Systems SOLIDWORKS