Will “Electronic Parts Designer” be Replaced By Robots? 🤔
2.5% Chance of Automation
“Electronic Parts Designer” will not be replaced by robots.
This job is ranked #98 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, develop, or test electronic components and systems for commercial, industrial, military, or scientific use employing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2072.00
- The Mean Annual Wage in the U.S. is $ 103,760.00
- The Mean Hourly Wage is $ 49.00
- Currently, there are 132,100 people on this job
☝️ Information based on the reference occupation “Electronics Engineers, Except Computer”.
Also Known As…
- Electronics Engineers, Except Computer
- Test Engineering Manager
- Test Engineer
- Research and Development Engineer (R&D Engineer)
- Radio Frequency Engineer (RF Engineer)
- Product Engineer
- Integrated Circuit Design Engineer (IC Design Engineer)
- Evaluation Engineer
- Engineering Manager
- Electronics Design Engineer
- Design Engineer
- Transmitter Engineer
- Transmission and Protection Engineer
- Traffic Circuit Engineer
- Telecommunications Engineer
- Telecommunication Engineer
- Systems Engineer
- Supplier Quality Engineer (SQE)
- Studio Operations Engineer-in-Charge
- Radio Frequency Design Engineer (RF Design Engineer)
- Radar Engineer
- Principal Engineer
- Outside Plant Engineer
- Outside Plant Cable Engineer
- Nanotechnologist
- Microwave Supervisor
- Microwave Engineer
- Guidance and Control System Engineer
- Failure Analysis Technician
- Equipment Engineer
- Electrophonic Engineer
- Electronics Test Engineer
- Electronics Research Engineer
- Electronics Engineer
- Electronic System Engineer
- Electrical Electronics Engineers
- Electrical Design Engineer
- Dial Equipment Engineer
- Customer Equipment Engineer
- Compatibility Test Engineer
- Communications Engineer
- Commercial Engineer
- Circuit Designer
- Circuit Design Engineer
- Central Office Facilities Planning Engineer
- Central Office Equipment Engineer
- Automotive Power Electronics Engineer
- Automation Engineer
Tasks for “Electronic Parts Designer”
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Determine project material or equipment needs.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Develop solar photovoltaic products, such as inverters or energy management systems.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
Related Technology & Tools
- Inductance capacitance resistance LCR meters
- High-power pulsed lasers
- Personal computers
- Communication bus analyzers
- Microprocessors
- Electronics probes
- Logic analyzers
- Oscilloscopes
- Multimeters
- Electronics counters
- Wave meters
- Desktop computers
- Function generators
- Programmable logic controllers PLC
- Wattmeters
- Photometers
- IBM Lotus Notes
- Dassault Systems SOLIDWORKS
- OrCAD Capture
- Extensible markup language XML
- Synopsys Saber
- Mentor Graphics PADS
- Autodesk AutoCAD
- Oracle Java
- Microsoft PowerPoint
- Oracle DBMS
- Microsoft Visual C# .NET
- Verilog
- C++
- Web browser software
- Assembler
- Graphics software
- Microsoft Visual Basic.NET
- Dassault Systemes CATIA
- C
- Real time operating system RTOS software
- Xilinx Integrated Software Environment ISE
- Ansoft Simplorer
- ESRI ArcGIS software
- Visual Numerics PV-WAVE
- Agile Product Lifecyle Management PLM
- Microsoft Office
- Very high-speed integrated circuit VHSIC hardware description language VHDL
- Hewlett-Packard HP OpenVMS
- Python
- Linux
- Structured query language SQL
- Two-dimensional 2D computer aided design CAD software
- The MathWorks MATLAB
- Rabbit Semiconductor Dynamic C
- Mathsoft Mathcad
- McCabe Software TRUEchange
- Microsoft Excel
- UNIX
- Three-dimensional 3D computer aided design CAD software
- Cadence PSpice
- National Instruments LabVIEW
- Embarcadero Delphi
- Formula translation/translator FORTRAN
- The MathWorks Simulink
- Microsoft Word