Will “Dial Equipment Engineer” be Replaced By Robots? 🤔
2.5% Chance of Automation
“Dial Equipment Engineer” will not be replaced by robots.
This job is ranked #98 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, develop, or test electronic components and systems for commercial, industrial, military, or scientific use employing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2072.00
- The Mean Annual Wage in the U.S. is $ 103,760.00
- The Mean Hourly Wage is $ 49.00
- Currently, there are 132,100 people on this job
☝️ Information based on the reference occupation “Electronics Engineers, Except Computer”.
Also Known As…
- Electronics Engineers, Except Computer
- Test Engineering Manager
- Test Engineer
- Research and Development Engineer (R&D Engineer)
- Radio Frequency Engineer (RF Engineer)
- Product Engineer
- Integrated Circuit Design Engineer (IC Design Engineer)
- Evaluation Engineer
- Engineering Manager
- Electronics Design Engineer
- Design Engineer
- Transmitter Engineer
- Transmission and Protection Engineer
- Traffic Circuit Engineer
- Telecommunications Engineer
- Telecommunication Engineer
- Systems Engineer
- Supplier Quality Engineer (SQE)
- Studio Operations Engineer-in-Charge
- Radio Frequency Design Engineer (RF Design Engineer)
- Radar Engineer
- Principal Engineer
- Outside Plant Engineer
- Outside Plant Cable Engineer
- Nanotechnologist
- Microwave Supervisor
- Microwave Engineer
- Guidance and Control System Engineer
- Failure Analysis Technician
- Equipment Engineer
- Electrophonic Engineer
- Electronics Test Engineer
- Electronics Research Engineer
- Electronics Engineer
- Electronic System Engineer
- Electronic Parts Designer
- Electrical Electronics Engineers
- Electrical Design Engineer
- Customer Equipment Engineer
- Compatibility Test Engineer
- Communications Engineer
- Commercial Engineer
- Circuit Designer
- Circuit Design Engineer
- Central Office Facilities Planning Engineer
- Central Office Equipment Engineer
- Automotive Power Electronics Engineer
- Automation Engineer
Tasks for “Dial Equipment Engineer”
- Develop solar photovoltaic products, such as inverters or energy management systems.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Determine project material or equipment needs.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
Related Technology & Tools
- Wattmeters
- Wave meters
- Communication bus analyzers
- Logic analyzers
- Multimeters
- Personal computers
- Photometers
- Inductance capacitance resistance LCR meters
- Function generators
- High-power pulsed lasers
- Microprocessors
- Oscilloscopes
- Desktop computers
- Electronics counters
- Programmable logic controllers PLC
- Electronics probes
- Linux
- Structured query language SQL
- The MathWorks MATLAB
- Microsoft Visual Basic.NET
- Autodesk AutoCAD
- Agile Product Lifecyle Management PLM
- Assembler
- Web browser software
- Dassault Systemes CATIA
- ESRI ArcGIS software
- Microsoft Word
- Oracle Java
- The MathWorks Simulink
- C++
- Python
- Xilinx Integrated Software Environment ISE
- Graphics software
- Microsoft Visual C# .NET
- Hewlett-Packard HP OpenVMS
- Three-dimensional 3D computer aided design CAD software
- Real time operating system RTOS software
- Mathsoft Mathcad
- Verilog
- Synopsys Saber
- C
- Dassault Systems SOLIDWORKS
- National Instruments LabVIEW
- Formula translation/translator FORTRAN
- Extensible markup language XML
- Very high-speed integrated circuit VHSIC hardware description language VHDL
- IBM Lotus Notes
- UNIX
- Oracle DBMS
- Cadence PSpice
- Microsoft PowerPoint
- OrCAD Capture
- Embarcadero Delphi
- Two-dimensional 2D computer aided design CAD software
- Visual Numerics PV-WAVE
- Mentor Graphics PADS
- McCabe Software TRUEchange
- Microsoft Office
- Microsoft Excel
- Ansoft Simplorer
- Rabbit Semiconductor Dynamic C