Will “Transmission and Protection Engineer” be Replaced By Robots? 🤔
2.5% Chance of Automation
“Transmission and Protection Engineer” will not be replaced by robots.
This job is ranked #98 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, develop, or test electronic components and systems for commercial, industrial, military, or scientific use employing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2072.00
- The Mean Annual Wage in the U.S. is $ 103,760.00
- The Mean Hourly Wage is $ 49.00
- Currently, there are 132,100 people on this job
☝️ Information based on the reference occupation “Electronics Engineers, Except Computer”.
Also Known As…
- Electronics Engineers, Except Computer
- Test Engineering Manager
- Test Engineer
- Research and Development Engineer (R&D Engineer)
- Radio Frequency Engineer (RF Engineer)
- Product Engineer
- Integrated Circuit Design Engineer (IC Design Engineer)
- Evaluation Engineer
- Engineering Manager
- Electronics Design Engineer
- Design Engineer
- Transmitter Engineer
- Traffic Circuit Engineer
- Telecommunications Engineer
- Telecommunication Engineer
- Systems Engineer
- Supplier Quality Engineer (SQE)
- Studio Operations Engineer-in-Charge
- Radio Frequency Design Engineer (RF Design Engineer)
- Radar Engineer
- Principal Engineer
- Outside Plant Engineer
- Outside Plant Cable Engineer
- Nanotechnologist
- Microwave Supervisor
- Microwave Engineer
- Guidance and Control System Engineer
- Failure Analysis Technician
- Equipment Engineer
- Electrophonic Engineer
- Electronics Test Engineer
- Electronics Research Engineer
- Electronics Engineer
- Electronic System Engineer
- Electronic Parts Designer
- Electrical Electronics Engineers
- Electrical Design Engineer
- Dial Equipment Engineer
- Customer Equipment Engineer
- Compatibility Test Engineer
- Communications Engineer
- Commercial Engineer
- Circuit Designer
- Circuit Design Engineer
- Central Office Facilities Planning Engineer
- Central Office Equipment Engineer
- Automotive Power Electronics Engineer
- Automation Engineer
Tasks for “Transmission and Protection Engineer”
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Determine project material or equipment needs.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Develop solar photovoltaic products, such as inverters or energy management systems.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
Related Technology & Tools
- Desktop computers
- Electronics probes
- Communication bus analyzers
- Programmable logic controllers PLC
- Electronics counters
- Wave meters
- Microprocessors
- Wattmeters
- Logic analyzers
- Function generators
- Inductance capacitance resistance LCR meters
- Personal computers
- High-power pulsed lasers
- Photometers
- Oscilloscopes
- Multimeters
- ESRI ArcGIS software
- Assembler
- Linux
- Rabbit Semiconductor Dynamic C
- Agile Product Lifecyle Management PLM
- The MathWorks Simulink
- UNIX
- Oracle DBMS
- Hewlett-Packard HP OpenVMS
- Very high-speed integrated circuit VHSIC hardware description language VHDL
- Oracle Java
- Synopsys Saber
- Extensible markup language XML
- Mentor Graphics PADS
- Microsoft Word
- Xilinx Integrated Software Environment ISE
- Web browser software
- Embarcadero Delphi
- Formula translation/translator FORTRAN
- IBM Lotus Notes
- Graphics software
- Two-dimensional 2D computer aided design CAD software
- The MathWorks MATLAB
- McCabe Software TRUEchange
- OrCAD Capture
- Autodesk AutoCAD
- National Instruments LabVIEW
- Microsoft Visual C# .NET
- Ansoft Simplorer
- Three-dimensional 3D computer aided design CAD software
- Python
- C++
- Visual Numerics PV-WAVE
- C
- Dassault Systemes CATIA
- Microsoft Excel
- Microsoft PowerPoint
- Verilog
- Real time operating system RTOS software
- Microsoft Visual Basic.NET
- Cadence PSpice
- Dassault Systems SOLIDWORKS
- Structured query language SQL
- Mathsoft Mathcad
- Microsoft Office