Will “Chief, Pesticides and Toxic Substances Branch” be Replaced By Robots? 🤔
1.8% Chance of Automation
“Chief, Pesticides and Toxic Substances Branch” will not be replaced by robots.
This job is ranked #81 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, plan, or perform engineering duties in the prevention, control, and remediation of environmental hazards using various engineering disciplines. Work may include waste treatment, site remediation, or pollution control technology.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2081.00
- The Mean Annual Wage in the U.S. is $ 88,530.00
- The Mean Hourly Wage is $ 42.00
- Currently, there are 52,280 people on this job
☝️ Information based on the reference occupation “Environmental Engineers”.
Also Known As…
- Environmental Engineers
- Sanitary Engineer
- Regulatory Environmental Compliance Manager
- Marine Engineer CPVEC (Marine Engineer Commercial Passenger Vessel Environmental Compliance)
- Hazardous Substances Engineer
- Global Director Air and Climate Change
- Environmental Remediation Specialist
- Environmental Engineer
- Environmental Analyst
- Chief, Pesticides and Toxic Substances Branch
- Air Pollution Control Engineer
- Water Treatment Plant Engineer
- Water Supply Engineer
- Water Resources Engineer
- Wastewater Treatment Engineer
- Waste Management Engineer
- Solid Waste Management Engineer
- Solid Waste Engineer
- Soil Engineer
- Sewage Disposal Engineer
- Sanitation Engineer
- Reservoir Engineer
- Remediation Project Engineer
- Radiation Protection Engineer
- Public Health Engineer
- Project Manager
- Project Engineer
- Pollution Control Engineer
- Irrigation Engineer
- Industrial Hygiene Engineer
- Hazardous Waste Management Specialist
- Hazardous Waste Management Control Engineer
- Flood Control Engineer
- Environmentalist
- Environmental Systems Coordinator
- Environmental Scientist
- Environmental Safety Specialist
- Environmental Remediation Engineer
- Environmental Project Manager
- Environmental Planner
- Environmental Designer
- Environmental Coordinator
- Environmental Consultant
Tasks for “Chief, Pesticides and Toxic Substances Branch”
- Assist in budget implementation, forecasts, or administration.
- Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
- Prepare or present public briefings on the status of environmental engineering projects.
- Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
- Assess the existing or potential environmental impact of land use projects on air, water, or land.
- Prepare, review, or update environmental investigation or recommendation reports.
- Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
- Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
- Monitor progress of environmental improvement programs.
- Write reports or articles for Web sites or newsletters related to environmental engineering issues.
- Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
- Inform company employees or other interested parties of environmental issues.
- Assess, sort, characterize, or pack known or unknown materials.
- Develop or present environmental compliance training or orientation sessions.
- Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
- Prepare, maintain, or revise quality assurance documentation or procedures.
- Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
- Design or supervise the design of systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
- Develop, implement, or manage plans or programs related to conservation or management of natural resources.
- Obtain, update, or maintain plans, permits, or standard operating procedures.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
- Request bids from suppliers or consultants.
- Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
- Advise industries or government agencies about environmental policies and standards.
- Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
- Prepare hazardous waste manifests or land disposal restriction notifications.
Related Technology & Tools
- Ultraviolet water purification systems
- Laser photometers
- Fume hoods
- Atomic absorption AA spectrometers
- Stem augers
- Laboratory ovens
- Plasma-mass spectrometers
- Desktop computers
- Sampling pumps
- Thermocouples
- Multi gas detector tubes
- pH meters
- Electric pumps
- Anaerobic growth chambers
- Fluorescence detectors
- Geoprobes
- Biological oxidizers
- Soil modulus failure testing devices
- Consolidometers
- Automatic titrators
- Supercritical fluid extractors
- Multiparameter water quality instruments
- Core drill rigs
- Air incubators
- Sorbent tubes
- Centrifuges
- Surface area analyzers
- Scanning potentiostats
- Global positioning system GPS receivers
- Mercury/hybrid atomizers
- Nitrogen oxide burners
- Stormwater samplers
- Capillary electrophoresis systems
- Particulate filters
- Electron capture detectors ECD
- Soil-erodability testing devices
- Liquid ring pumps
- Air velocity meters
- Individual burner air measurement IBAM probes
- Autoclaves
- Environmental probe systems
- Sample concentrators
- Ion chromatographs
- Liquid scintillation counters
- Limnological core loggers
- Respirometers
- Flow meters
- Particle counters
- Nutrient analyzers
- Hydrological current meters
- Limnological coring drills
- Sampling trains
- Seismographs
- Organic carbon analyzers
- Total organic carbon TOC analyzers
- Balances
- Pitot tubes
- Incubators
- Photometers
- Spectrophotometers
- Soil carbon-nitrogen CN analyzers
- Water level recorders
- Ambient air measurement devices
- Microwave digestion instruments
- Ultraviolet UV light detectors
- Wave gauges
- California bearing ratio CBR testing devices
- Thermal/catalytic oxidizers TCO
- Microbics toxicity analyzers
- Colorimeters
- Solid shear failure testing devices
- Mass spectrometers
- Mud rotary drills
- Gas chromatographs GC
- Chemostats
- Headspace autosamplers
- Dissolved oxygen meters
- Gas meters
- Flame emission detectors
- Trace metal analyzers
- Flame ionization detectors FID
- Freeze dryers
- Universal fractionators
- Ozonators
- Combustible gas meters
- Graphite furnaces
- Direct shear testing devices
- Atomic absorption AA spectrophotometers
- Soil electrical conductivity measurement devices
- Conductivity meters
- Thermal conductivity detectors
- Interferometeric refractormeters
- Glove box systems
- Argon ionization detectors
- Shakers
- Charge-coupled device CCD cameras
- Luminometers
- Whole air canisters
- Notebook computers
- Liquid chromatography detectors
- Epifluorescence microscopes
- Fluorescence spectrophotometers
- Image analysis software
- Continuous emission management software
- Material safety data sheet MSDS software
- Wind flow modeling software
- Formula translation/translator FORTRAN
- Maplesoft Maple
- Finite element method FEM software
- SofTech CADRA
- Computer aided design CAD software
- Oil mapping software
- ESRI ArcGIS software
- Hazardous materials management HMS software
- Autodesk AutoCAD
- Stormwater runoff modeling software
- WAM software
- Gas dispersion model software
- LINDO
- Greenhouse gas management software
- Fugitive emission leak detection software
- Microsoft Access
- Insightful S-PLUS
- Environmental health and safety documentation software
- Microsoft PowerPoint
- Ecological risk assessment software
- Water flow modeling software
- Regulatory compliance management software
- SAS
- Computer aided design and drafting software CADD
- Bentley Microstation
- Rockwell Automation Arena
- RockWare MODFLOW
- HEC RAS
- Waste management software
- Photogrammetric software
- C++
- DHI Water and Environment MIKE SHE
- Simulation software
- ANSYS
- Microsoft Project
- Microsoft Office
- Simultaneous location and mapping SLAM
- Microsoft Word
- Air dispersion modeling software
- XP Software XPSWMM
- Microsoft Excel
- Geomechanical design analysis GDA software
- ESRI ArcView
- Python
- Hydrologic simulation program fortan HSPF software
- Autodesk AutoCAD Civil 3D
- The MathWorks MATLAB
- Site remediation management software