Will “Cinder Crew Worker” be Replaced By Robots? 🤔

88% Chance of Automation

“Cinder Crew Worker” will probably be replaced by robots.

This job is ranked #512 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. May assist other craft workers.

Job Details

The SOC (Standard Occupational Classification) code is 47-2061.00
The Mean Annual Wage in the U.S. is $ 37,890.00
The Mean Hourly Wage is $ 18.00
Currently, there are 912,100 people on this job

☝️ Information based on the reference occupation “Construction Laborers”.

Also Known As…

Tasks for “Cinder Crew Worker”

Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Transport or set explosives for tunnel, shaft, or road construction.
Operate jackhammers or drills to break up concrete or pavement.
Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
Mix, pour, or spread concrete, using portable cement mixers.
Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
Raze buildings or salvage useful materials.
Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
Use computers or other input devices to control robotic pipe cutters or cleaners.
Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations.
Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
Place, consolidate, or protect case-in-place concrete or masonry structures.
Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
Clean or prepare construction sites to eliminate possible hazards.
Provide assistance to craft workers, such as carpenters, plasterers, or masons.
Read plans, instructions, or specifications to determine work activities.
Mix ingredients to create compounds for covering or cleaning surfaces.
Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
Lubricate, clean, or repair machinery, equipment, or tools.
Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
Identify, pack, or transport hazardous or radioactive materials.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
Position, join, align, or seal structural components, such as concrete wall sections or pipes.
Apply weather-stripping to reduce energy loss.
Control traffic passing near, in, or around work zones.

Related Technology & Tools

Sidewalk sweepers
Air monitoring equipment
Power sanders
Screwdrivers
Cold chisels
Hand trucks
Measuring wheels
Mortar hoes
Scissor lifts
Protective suits
Pavement breakers
Gas leak detection devices
Smudge pots
Concrete mixers
Spades
Forklifts
Power buggies
Slings
Hydraulic boring machines
Bench grinders
Shovels
Brick carrier forks
Micrometers
Generators
Torches
Hole cutters
Manlifts
Asphalt mops
Drill presses
Pressure washers
Mowing equipment
Plasma cutters
Transit levels
Hoists
Wagon drills
Water levels
Spirit levels
Circular saws
Mud jacks
Scarifiers
Snowplows
Swing chairs
Bale hooks
Hammers
Concrete pumpers
Welding hoods
Scaffolding
Walk-behind compacting equipment
Sandblasters
Saws
Rough terrain forklifts
Jackhammers
Trowels
Oxygen/acetylene torches
Air compressors
Demolition saws
Laser levels
Coring machines
Cable pullers
Air drills
Hydraulic speed shoring equipment
Gin poles
Pickup trucks
Asphalt kettles
Axes
Post hole augers
Mattocks
Fall arrest systems
Jet trucks for cleaning sewer lines
Hydraulic booms
Swing stages
Water tank trucks
Masonry forklifts
Liquid propane torches
Adjustable widemouth pliers
Winches
Wire stretchers
Tape measures
Pedestal grinders
Chipping guns
Surveying rods
Bosun chairs
Motor graders
Picks
Guniting machines
Oil distributors
Salamanders
Water samplers
Brick tongs
Trenchers
Skid steer loaders
Brick hammers
Bandsaws
Shielded arc welding tools
Two way radios
Hydraulic track-guided wall saws
Sewer rodding machines
Jig saws
Road rollers
Caulking guns
Floats
Dump trucks
Adjustable wrenches
Robotic pipe cutters
Rakes
Electric drills
Remote pipe cameras
Ladders
Power drills
Floor sanders
Tripods
Respirators
Steam cleaning equipment
Water spraying equipment
Impact hammers
Carpenters' levels
Suction sweepers
Laser measuring devices
Smoke testers
Crawler shovels
Weed sprayers
Forks
Nail guns
Disc grinders
Rotary hammers
Screeds
Mortar mixers
Plaster mixers
Saber saws
Tampers
Walk-behind saws
Floor saws
Chip spreaders
Dynamite blasters
Paddle mixers
Loaders
Steam jennies
Tappers
Tuck pointers
Cutout saws
Pneumatic drills
Concrete saws
Hand grinders
Pneumatic staplers
Laser screeds
Calipers
Temperature probes
Punches
Reciprocating saws
Belt conveyors
Power screwdrivers
Stucco spray guns
Crowbars
Laser guidance equipment for pipe placement
Paint sprayers
Cutoff saws
Vibratory plate compactors
Sewer cleaner vactors
Electric boring machines
Carpenters' squares
Chain saws
Fencing pliers
Kerosene burners
Plumb bobs
Earth tampers
Impact wrenches
Theodolites
Robotic pipe cleaners
Levels
Hydraulic rock drills
Hammer drills
Hydraulic chainsaws
Asphalt saws
Ride-on vacuum cleaners
Stump cutters

Oracle Primavera Enterprise Project Portfolio Management
Autodesk Revit
Microsoft Windows