Will “Concrete Building Assembler” be Replaced By Robots? 🤔

88% Chance of Automation

“Concrete Building Assembler” will probably be replaced by robots.

This job is ranked #512 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. May assist other craft workers.

Job Details

The SOC (Standard Occupational Classification) code is 47-2061.00
The Mean Annual Wage in the U.S. is $ 37,890.00
The Mean Hourly Wage is $ 18.00
Currently, there are 912,100 people on this job

☝️ Information based on the reference occupation “Construction Laborers”.

Also Known As…

Tasks for “Concrete Building Assembler”

Mix ingredients to create compounds for covering or cleaning surfaces.
Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
Mix, pour, or spread concrete, using portable cement mixers.
Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
Control traffic passing near, in, or around work zones.
Use computers or other input devices to control robotic pipe cutters or cleaners.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Provide assistance to craft workers, such as carpenters, plasterers, or masons.
Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations.
Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.
Lubricate, clean, or repair machinery, equipment, or tools.
Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Apply weather-stripping to reduce energy loss.
Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
Position, join, align, or seal structural components, such as concrete wall sections or pipes.
Place, consolidate, or protect case-in-place concrete or masonry structures.
Clean or prepare construction sites to eliminate possible hazards.
Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
Identify, pack, or transport hazardous or radioactive materials.
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
Raze buildings or salvage useful materials.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
Operate jackhammers or drills to break up concrete or pavement.
Read plans, instructions, or specifications to determine work activities.
Transport or set explosives for tunnel, shaft, or road construction.

Related Technology & Tools

Guniting machines
Steam jennies
Power sanders
Gas leak detection devices
Electric boring machines
Rakes
Swing chairs
Picks
Saber saws
Hole cutters
Hand trucks
Swing stages
Chain saws
Circular saws
Air monitoring equipment
Robotic pipe cutters
Plaster mixers
Crawler shovels
Two way radios
Air drills
Coring machines
Pavement breakers
Earth tampers
Cold chisels
Asphalt kettles
Demolition saws
Power screwdrivers
Forklifts
Robotic pipe cleaners
Mortar mixers
Screeds
Brick hammers
Bosun chairs
Bench grinders
Jig saws
Laser guidance equipment for pipe placement
Manlifts
Shovels
Hammer drills
Hydraulic track-guided wall saws
Tripods
Water spraying equipment
Surveying rods
Theodolites
Hydraulic boring machines
Bandsaws
Stucco spray guns
Walk-behind compacting equipment
Punches
Motor graders
Jet trucks for cleaning sewer lines
Wagon drills
Torches
Tappers
Masonry forklifts
Calipers
Ladders
Paint sprayers
Sewer rodding machines
Adjustable wrenches
Slings
Laser levels
Ride-on vacuum cleaners
Water samplers
Hydraulic booms
Spades
Salamanders
Walk-behind saws
Gin poles
Bale hooks
Brick tongs
Mowing equipment
Laser measuring devices
Spirit levels
Welding hoods
Respirators
Tampers
Remote pipe cameras
Belt conveyors
Scaffolding
Protective suits
Forks
Pneumatic drills
Laser screeds
Wire stretchers
Scissor lifts
Air compressors
Water tank trucks
Floor sanders
Hammers
Concrete pumpers
Axes
Screwdrivers
Plumb bobs
Hand grinders
Reciprocating saws
Floats
Winches
Power buggies
Tuck pointers
Sewer cleaner vactors
Rotary hammers
Concrete saws
Dynamite blasters
Concrete mixers
Steam cleaning equipment
Smudge pots
Fall arrest systems
Mortar hoes
Saws
Trenchers
Pedestal grinders
Asphalt mops
Transit levels
Electric drills
Hydraulic rock drills
Nail guns
Sandblasters
Sidewalk sweepers
Post hole augers
Chip spreaders
Adjustable widemouth pliers
Brick carrier forks
Temperature probes
Chipping guns
Pneumatic staplers
Skid steer loaders
Hydraulic speed shoring equipment
Hydraulic chainsaws
Floor saws
Scarifiers
Impact hammers
Smoke testers
Stump cutters
Fencing pliers
Shielded arc welding tools
Liquid propane torches
Impact wrenches
Generators
Caulking guns
Loaders
Mattocks
Jackhammers
Carpenters' squares
Oxygen/acetylene torches
Disc grinders
Measuring wheels
Pickup trucks
Pressure washers
Oil distributors
Road rollers
Cutout saws
Carpenters' levels
Trowels
Crowbars
Snowplows
Cutoff saws
Dump trucks
Hoists
Weed sprayers
Paddle mixers
Mud jacks
Suction sweepers
Vibratory plate compactors
Water levels
Micrometers
Kerosene burners
Plasma cutters
Asphalt saws
Power drills
Tape measures
Levels
Cable pullers
Rough terrain forklifts
Drill presses

Autodesk Revit
Microsoft Windows
Oracle Primavera Enterprise Project Portfolio Management