Will “Concrete Curer” be Replaced By Robots? 🤔

88% Chance of Automation

“Concrete Curer” will probably be replaced by robots.

This job is ranked #512 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. May assist other craft workers.

Job Details

The SOC (Standard Occupational Classification) code is 47-2061.00
The Mean Annual Wage in the U.S. is $ 37,890.00
The Mean Hourly Wage is $ 18.00
Currently, there are 912,100 people on this job

☝️ Information based on the reference occupation “Construction Laborers”.

Also Known As…

Tasks for “Concrete Curer”

Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.
Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations.
Transport or set explosives for tunnel, shaft, or road construction.
Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
Mix, pour, or spread concrete, using portable cement mixers.
Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
Use computers or other input devices to control robotic pipe cutters or cleaners.
Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
Apply weather-stripping to reduce energy loss.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Provide assistance to craft workers, such as carpenters, plasterers, or masons.
Position, join, align, or seal structural components, such as concrete wall sections or pipes.
Clean or prepare construction sites to eliminate possible hazards.
Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
Operate jackhammers or drills to break up concrete or pavement.
Control traffic passing near, in, or around work zones.
Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
Place, consolidate, or protect case-in-place concrete or masonry structures.
Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
Read plans, instructions, or specifications to determine work activities.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Lubricate, clean, or repair machinery, equipment, or tools.
Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Raze buildings or salvage useful materials.
Identify, pack, or transport hazardous or radioactive materials.
Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
Mix ingredients to create compounds for covering or cleaning surfaces.

Related Technology & Tools

Measuring wheels
Smudge pots
Hand trucks
Hydraulic rock drills
Disc grinders
Floats
Protective suits
Calipers
Jackhammers
Swing stages
Slings
Pedestal grinders
Cutoff saws
Ride-on vacuum cleaners
Hoists
Temperature probes
Crowbars
Winches
Power drills
Post hole augers
Adjustable widemouth pliers
Tripods
Levels
Water levels
Mortar hoes
Stucco spray guns
Tampers
Mortar mixers
Asphalt saws
Tuck pointers
Manlifts
Screwdrivers
Earth tampers
Ladders
Cold chisels
Bale hooks
Kerosene burners
Nail guns
Mowing equipment
Mud jacks
Water tank trucks
Picks
Adjustable wrenches
Smoke testers
Rough terrain forklifts
Hydraulic speed shoring equipment
Cutout saws
Fencing pliers
Floor sanders
Forks
Sidewalk sweepers
Drill presses
Sandblasters
Gin poles
Guniting machines
Wagon drills
Chain saws
Laser levels
Scarifiers
Mattocks
Remote pipe cameras
Paint sprayers
Weed sprayers
Electric drills
Circular saws
Swing chairs
Vibratory plate compactors
Brick tongs
Demolition saws
Sewer rodding machines
Road rollers
Punches
Cable pullers
Pavement breakers
Water samplers
Shielded arc welding tools
Dynamite blasters
Plaster mixers
Robotic pipe cleaners
Asphalt mops
Torches
Hydraulic booms
Caulking guns
Pressure washers
Stump cutters
Power screwdrivers
Fall arrest systems
Coring machines
Saber saws
Motor graders
Trowels
Wire stretchers
Pneumatic drills
Brick carrier forks
Shovels
Loaders
Crawler shovels
Spades
Hammers
Carpenters' levels
Liquid propane torches
Floor saws
Saws
Bandsaws
Hammer drills
Concrete pumpers
Concrete saws
Respirators
Robotic pipe cutters
Jet trucks for cleaning sewer lines
Impact hammers
Plasma cutters
Paddle mixers
Laser screeds
Asphalt kettles
Air drills
Screeds
Two way radios
Snowplows
Scaffolding
Hand grinders
Surveying rods
Salamanders
Walk-behind saws
Air monitoring equipment
Chip spreaders
Welding hoods
Rotary hammers
Pneumatic staplers
Power buggies
Laser measuring devices
Brick hammers
Hole cutters
Suction sweepers
Spirit levels
Dump trucks
Plumb bobs
Micrometers
Jig saws
Oxygen/acetylene torches
Sewer cleaner vactors
Theodolites
Oil distributors
Air compressors
Tape measures
Forklifts
Masonry forklifts
Gas leak detection devices
Water spraying equipment
Walk-behind compacting equipment
Generators
Carpenters' squares
Scissor lifts
Electric boring machines
Reciprocating saws
Transit levels
Belt conveyors
Tappers
Axes
Pickup trucks
Concrete mixers
Impact wrenches
Chipping guns
Power sanders
Laser guidance equipment for pipe placement
Skid steer loaders
Steam jennies
Rakes
Hydraulic boring machines
Bosun chairs
Hydraulic track-guided wall saws
Bench grinders
Steam cleaning equipment
Trenchers
Hydraulic chainsaws

Microsoft Windows
Autodesk Revit
Oracle Primavera Enterprise Project Portfolio Management