Will “Mixing Plant Dumper” be Replaced By Robots? 🤔

88% Chance of Automation

“Mixing Plant Dumper” will probably be replaced by robots.

This job is ranked #512 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. May assist other craft workers.

Job Details

The SOC (Standard Occupational Classification) code is 47-2061.00
The Mean Annual Wage in the U.S. is $ 37,890.00
The Mean Hourly Wage is $ 18.00
Currently, there are 912,100 people on this job

☝️ Information based on the reference occupation “Construction Laborers”.

Also Known As…

Tasks for “Mixing Plant Dumper”

Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
Raze buildings or salvage useful materials.
Transport or set explosives for tunnel, shaft, or road construction.
Control traffic passing near, in, or around work zones.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations.
Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
Operate jackhammers or drills to break up concrete or pavement.
Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
Position, join, align, or seal structural components, such as concrete wall sections or pipes.
Lubricate, clean, or repair machinery, equipment, or tools.
Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.
Identify, pack, or transport hazardous or radioactive materials.
Use computers or other input devices to control robotic pipe cutters or cleaners.
Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
Mix, pour, or spread concrete, using portable cement mixers.
Clean or prepare construction sites to eliminate possible hazards.
Place, consolidate, or protect case-in-place concrete or masonry structures.
Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Read plans, instructions, or specifications to determine work activities.
Mix ingredients to create compounds for covering or cleaning surfaces.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Apply weather-stripping to reduce energy loss.
Provide assistance to craft workers, such as carpenters, plasterers, or masons.

Related Technology & Tools

Punches
Stump cutters
Laser screeds
Cable pullers
Floor saws
Remote pipe cameras
Concrete mixers
Protective suits
Rough terrain forklifts
Jet trucks for cleaning sewer lines
Robotic pipe cutters
Shovels
Water levels
Bandsaws
Gin poles
Trenchers
Dump trucks
Tuck pointers
Bale hooks
Asphalt mops
Pickup trucks
Winches
Smudge pots
Hydraulic chainsaws
Tappers
Salamanders
Steam cleaning equipment
Ride-on vacuum cleaners
Asphalt saws
Demolition saws
Nail guns
Micrometers
Crawler shovels
Water spraying equipment
Pneumatic drills
Laser levels
Impact hammers
Fall arrest systems
Electric boring machines
Axes
Suction sweepers
Disc grinders
Welding hoods
Loaders
Earth tampers
Asphalt kettles
Ladders
Slings
Torches
Laser measuring devices
Saber saws
Hammer drills
Screwdrivers
Pavement breakers
Water tank trucks
Brick hammers
Belt conveyors
Sidewalk sweepers
Hoists
Mortar mixers
Paddle mixers
Manlifts
Walk-behind saws
Picks
Pneumatic staplers
Screeds
Levels
Mowing equipment
Generators
Pressure washers
Trowels
Saws
Chip spreaders
Vibratory plate compactors
Masonry forklifts
Swing stages
Laser guidance equipment for pipe placement
Air drills
Mud jacks
Stucco spray guns
Power buggies
Sewer rodding machines
Power sanders
Cutout saws
Calipers
Swing chairs
Brick tongs
Floor sanders
Rakes
Sandblasters
Electric drills
Pedestal grinders
Theodolites
Circular saws
Caulking guns
Scaffolding
Hydraulic speed shoring equipment
Tampers
Crowbars
Paint sprayers
Temperature probes
Bosun chairs
Sewer cleaner vactors
Water samplers
Motor graders
Concrete pumpers
Scissor lifts
Cutoff saws
Cold chisels
Surveying rods
Road rollers
Steam jennies
Skid steer loaders
Plumb bobs
Snowplows
Respirators
Hydraulic track-guided wall saws
Tape measures
Guniting machines
Brick carrier forks
Adjustable wrenches
Chain saws
Hand grinders
Plaster mixers
Wagon drills
Air monitoring equipment
Forks
Carpenters' levels
Impact wrenches
Plasma cutters
Hole cutters
Wire stretchers
Weed sprayers
Kerosene burners
Hydraulic rock drills
Oxygen/acetylene torches
Shielded arc welding tools
Hydraulic boring machines
Chipping guns
Dynamite blasters
Liquid propane torches
Air compressors
Transit levels
Smoke testers
Concrete saws
Jig saws
Coring machines
Gas leak detection devices
Hydraulic booms
Power drills
Post hole augers
Drill presses
Rotary hammers
Hammers
Fencing pliers
Forklifts
Mattocks
Power screwdrivers
Walk-behind compacting equipment
Measuring wheels
Adjustable widemouth pliers
Hand trucks
Oil distributors
Bench grinders
Mortar hoes
Tripods
Two way radios
Scarifiers
Floats
Spirit levels
Jackhammers
Robotic pipe cleaners
Reciprocating saws
Spades
Carpenters' squares

Microsoft Windows
Autodesk Revit
Oracle Primavera Enterprise Project Portfolio Management