Will “Boiler Operator” be Replaced By Robots? 🤔

89% Chance of Automation

“Boiler Operator” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Boiler Operator”

Operate mechanical hoppers and provide assistance in their adjustment and repair.
Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Investigate and report on accidents.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Weigh, measure, and record fuel used.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Test electrical systems to determine voltages, using voltage meters.
Ignite fuel in burners, using torches or flames.
Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Develop operation, safety, and maintenance procedures or assist in their development.
Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Install burners and auxiliary equipment, using hand tools.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Receive instructions from steam engineers regarding steam plant and air compressor operations.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.

Related Technology & Tools

Safety glasses
Steam cleaning equipment
Grapple cranes
Rotary hammers
Tapping machines
Colorimeters
Opacity meters
Drill presses
Personal computers
Dial indicators
Pipe wrenches
Ratchets
Hydraulic boom trucks
Electronic temperature sensors
Sandblasters
Turbidimeters
Grease guns
Graduated glass cylinders
Descalers
Metal cutting dies
Oil guns
Pneumatic pumps
Infrared guns
Water column gauges
Safety gloves
Voltmeters
Straight screwdrivers
Two way radios
Dial calipers
Industrial platform scales
Socket wrench sets
Hydraulic press frames
Layout squares
Filter masks
Locking pliers
Phillips head screwdrivers
Amp meters
Dropping pipettes
Micrometers
Hydrometers
Gas brazing equipment
Electric drain augers
Oxyacetylene welding equipment
Forklifts
Hand pipe threaders
Power drills
Manifold test gauges
Protective ear plugs
Metal cutting taps
Scaffolding
Bench lathes
Electronic remote reading thermometers
Self-contained breathing apparatus
Claw hammers
Power meters
Thermocouples
Power saws
Adjustable wrenches
Ladders
Precision levels
Conductivity meters
pH indicators
Pressure gauges
Ohmmeters
Combustion analyzers
Pipe cutters
Sling psychrometers
Shielded arc welding tools
Digital multimeters
Pressure transmitters
Equipment cleaning scrapers
Bourdon tubes
Programmable logic controllers PLC

Microsoft Word
Graphics software
Microsoft Office
Spreadsheet software
Database software
Computerized maintenance management system CMMS
Email software
Statistical software
Web browser software
Word processing software
Building management system software
Microsoft Excel
Data entry software