Will “Utilities Operator” be Replaced By Robots? 🤔

89% Chance of Automation

“Utilities Operator” will probably be replaced by robots.

This job is ranked #529 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate or maintain stationary engines, boilers, or other mechanical equipment to provide utilities for buildings or industrial processes. Operate equipment, such as steam engines, generators, motors, turbines, and steam boilers.

Job Details

The SOC (Standard Occupational Classification) code is 51-8021.00
The Mean Annual Wage in the U.S. is $ 61,410.00
The Mean Hourly Wage is $ 29.00
Currently, there are 33,720 people on this job

☝️ Information based on the reference occupation “Stationary Engineers and Boiler Operators”.

Also Known As…

Tasks for “Utilities Operator”

Receive instructions from steam engineers regarding steam plant and air compressor operations.
Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
Test electrical systems to determine voltages, using voltage meters.
Operate mechanical hoppers and provide assistance in their adjustment and repair.
Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
Develop operation, safety, and maintenance procedures or assist in their development.
Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
Weigh, measure, and record fuel used.
Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
Ignite fuel in burners, using torches or flames.
Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
Operate or tend stationary engines, boilers, and auxiliary equipment such as pumps, compressors, and air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
Install burners and auxiliary equipment, using hand tools.
Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
Investigate and report on accidents.
Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.

Related Technology & Tools

Rotary hammers
Pneumatic pumps
Forklifts
Colorimeters
Metal cutting dies
Conductivity meters
Graduated glass cylinders
Claw hammers
Combustion analyzers
Opacity meters
Tapping machines
Power drills
pH indicators
Manifold test gauges
Steam cleaning equipment
Dial indicators
Programmable logic controllers PLC
Ladders
Precision levels
Hydraulic boom trucks
Hand pipe threaders
Safety gloves
Layout squares
Water column gauges
Shielded arc welding tools
Pressure transmitters
Straight screwdrivers
Electronic remote reading thermometers
Power saws
Safety glasses
Hydraulic press frames
Personal computers
Protective ear plugs
Descalers
Ohmmeters
Oxyacetylene welding equipment
Voltmeters
Grease guns
Bourdon tubes
Ratchets
Bench lathes
Micrometers
Two way radios
Turbidimeters
Dropping pipettes
Amp meters
Sandblasters
Equipment cleaning scrapers
Pipe wrenches
Digital multimeters
Pipe cutters
Thermocouples
Infrared guns
Electronic temperature sensors
Electric drain augers
Power meters
Dial calipers
Industrial platform scales
Locking pliers
Self-contained breathing apparatus
Phillips head screwdrivers
Sling psychrometers
Socket wrench sets
Metal cutting taps
Drill presses
Gas brazing equipment
Hydrometers
Oil guns
Scaffolding
Pressure gauges
Adjustable wrenches
Filter masks
Grapple cranes

Web browser software
Spreadsheet software
Microsoft Office
Data entry software
Microsoft Word
Microsoft Excel
Statistical software
Building management system software
Computerized maintenance management system CMMS
Email software
Graphics software
Word processing software
Database software