Will “Body Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Body Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool Design Engineer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Body Engineer”
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Recommend design modifications to eliminate machine or system malfunctions.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Provide feedback to design engineers on customer problems or needs.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Provide technical customer service.
- Solicit new business.
- Write performance requirements for product development or engineering projects.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
Related Technology & Tools
- Supersonic wind tunnels
- Subsonic wind tunnels
- Radio frequency sensors
- Deep reactive ion etchers DRIE
- Wafer bonding systems
- Pitot tubes
- Interferometers
- Precision positioning tables
- Accelerometers
- Laser Doppler anemometers
- Nano indentation systems
- Cryogenic apparatus
- Wafer dicing saws
- Optical sensors
- Laser digitizers
- Position transducers
- Fluorescence spectrometers
- Pattern generators
- Digital to analog converters
- Projection lithography equipment
- Analog to digital converters
- Video editing equipment
- Scanning tunneling microscopes STM
- Multi-pen plotters
- Chemical-mechanical polishing equipment
- Ellipsometers
- Dynamometers
- Servohydraulic material testing machines
- Heat exchangers
- X ray tubes
- Scanning probe microscopes SPM
- Aligners
- Stylus profilometers
- Laser Doppler velocimeters LDV
- Dynamic strain indicators
- Computed tomography CT systems
- Wire bonders
- Oscilloscopes
- Fused deposition modeling FDM machines
- Surface profilometers
- Spin-coaters
- Anodic wafer bonding systems
- Programmable logic controllers PLC
- X ray radiographic systems
- Vapor deposition tube furnaces
- Spectrum analyzers
- Velocity transducers
- Acoustic emission AE sensors
- Plasma etchers
- Scanning electron microscopes SEM
- Optical laser scanners
- Digital particle image velocimeters
- Function generators
- Flip-chip wafer bonding systems
- Torsional converters
- Evaporation systems
- Vibration isolators
- Contact lithography equipment
- Coordinate measuring machines CMM
- Contact testers
- Personal computers
- Infrared thermography cameras
- Interferometric microscopes
- Multimeters
- Strain gauges
- Sputtering systems
- Environmental testing chambers
- Steppers
- Force transducers
- Vibration control systems
- Torque transducers
- Photoelastic testing machines
- Wire electrical discharge machines
- Rapid thermal processing systems
- Vibration testers
- Air compressors
- Optical analysis software
- Accelerated life testing software
- Dassault Systems SOLIDWORKS
- ANSYS
- Sigmetrix CETOL 6 Sigma
- Dassault Systemes CATIA
- Mathsoft Mathcad
- Data acquisition software
- Adobe Systems Adobe Illustrator
- UGS I-DEAS
- Cost estimation software
- MAYA Nastran
- The MathWorks MATLAB
- C
- Microsoft Office
- Modal analysis software
- C++
- Computer numerical control CNC software
- 1CadCam Unigraphics
- Oracle Primavera Enterprise Project Portfolio Management
- SAP
- Microsoft Visual Basic
- Computational fluid dynamics CFD software
- Adobe Systems Adobe ActionScript
- Microsoft PowerPoint
- Rapid prototyping software
- Verilog
- Autodesk Revit
- Bill of materials software
- Minitab
- Blue Ridge Numerics CFDesign
- Motion analysis software
- Microsoft Project
- IBM Notes
- Reverse engineering software
- Lambda Research OSLO
- Human machine interface HMI software
- Zemax
- Microsoft Access
- Autodesk AutoCAD
- Finite element method FEM software
- Hewlett-Packard HP Graphics Language HPGL
- Statistical energy analysis SEA software
- Statistical software
- Design of experiments DOE software
- Computer aided design and drafting software CADD
- ReliaSoft Alta 6 Pro
- Microsoft Word
- PTC Creo Parametric
- Video analysis software
- Rockwell Automation
- Microsoft Excel
- G-code
- Microsoft Visio
- Autodesk AutoCAD Civil 3D
- Ladder Logic
- National Instruments LabVIEW
- Mesh generation software
- Failure assessment software
- Reliability analysis software
- Grid generation software
- Metrix Imageware Surfacer
- Failure mode and effects analysis FMEA software
- Life cycle cost software
- Intergraph Plant Design System PDS
- COSMOSWorks
- MUMPS M
- ReliaSoft BlockSim
- InnovMetric PolyWorks
- ReliaSoft Weibull++ 6
- Computer aided manufacturing CAM software
- ESRI ArcGIS software
- Bentley MicroStation