Will “Tool Design Engineer” be Replaced By Robots? 🤔
1.1% Chance of Automation
“Tool Design Engineer” will not be replaced by robots.
This job is ranked #53 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2141.00
- The Mean Annual Wage in the U.S. is $ 89,800.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 285,790 people on this job
☝️ Information based on the reference occupation “Mechanical Engineers”.
Also Known As…
- Mechanical Engineers
- Test Engineer
- Project Engineer
- Product Engineer
- Process Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Equipment Engineer
- Design Maintenance Engineer
- Design Engineer
- Application Engineer
- Wind Turbine Mechanical Engineer
- Weapons Engineer
- Weapons Designer
- Ventilating Expert
- Ventilating Engineer
- Utilization Engineer
- Tooling Engineer
- Tool Engineer
- Tool Designer
- Tool and Die Engineer
- Textile Engineer
- Test Inspection Engineer
- Supplier Quality Engineer (SQE)
- Stress Analyst
- Sheet Metal Engineer
- Servomechanism Designer
- Roller Coaster Engineer
- Roller Coaster Designer
- Refrigeration Engineer
- Products Mechanical Design Engineer
- Plant Equipment Engineer
- Motorcycle Designer
- Mechanical Research Engineer
- Mechanical Equipment Test Engineer
- Mechanical Development Engineer
- Mechanical Design Facilities or Products Engineer
- Machine Tool Designer
- Machine Design Engineer
- Internal Combustion Engineer
- Installation Engineer
- Industrial Retrofit Designer
- Industrial Green Systems Designer
- Hydroelectric Plant Mechanical Engineer
- Hydraulic Engineer
- HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
- HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
- HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
- HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
- Heating Engineer
- Heating and Cooling Systems Engineer
- Geothermal Power Generation Mechanical Engineer
- Field Service Engineer
- Failure Analysis Technician
- Facilities Mechanical Design Engineer
- Erecting Engineer
- Engineer
- Engine Designer
- Electro-Mechanical Engineer
- Dust Control Engineer
- Distribution Engineer
- Diesel Retrofit Designer
- Diesel Engineer
- Cryogenics Engineer
- Cooling and Heating Systems Design Engineer
- Combustion Engineer
- Car Designer
- Brake Engineer
- Body Engineer
- Automation Engineer
- Auto Research Engineer
- Air Conditioning Engineer
Tasks for “Tool Design Engineer”
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Provide technical customer service.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Solicit new business.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Design test control apparatus or equipment or develop procedures for testing products.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Write performance requirements for product development or engineering projects.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Provide feedback to design engineers on customer problems or needs.
- Recommend design modifications to eliminate machine or system malfunctions.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
Related Technology & Tools
- Flip-chip wafer bonding systems
- Contact lithography equipment
- Infrared thermography cameras
- Servohydraulic material testing machines
- Personal computers
- Air compressors
- Nano indentation systems
- Subsonic wind tunnels
- Wafer dicing saws
- Scanning probe microscopes SPM
- Steppers
- Coordinate measuring machines CMM
- Optical sensors
- Scanning tunneling microscopes STM
- Computed tomography CT systems
- Optical laser scanners
- Pattern generators
- Spin-coaters
- Fluorescence spectrometers
- Vibration control systems
- Aligners
- Multi-pen plotters
- Environmental testing chambers
- Fused deposition modeling FDM machines
- Dynamic strain indicators
- Vapor deposition tube furnaces
- Torque transducers
- Acoustic emission AE sensors
- Anodic wafer bonding systems
- Surface profilometers
- Radio frequency sensors
- Accelerometers
- Vibration isolators
- Sputtering systems
- Laser Doppler anemometers
- Wafer bonding systems
- Programmable logic controllers PLC
- Multimeters
- Photoelastic testing machines
- Chemical-mechanical polishing equipment
- Projection lithography equipment
- Digital to analog converters
- Supersonic wind tunnels
- Laser digitizers
- Strain gauges
- Function generators
- Wire bonders
- Analog to digital converters
- Heat exchangers
- Vibration testers
- Precision positioning tables
- Deep reactive ion etchers DRIE
- Contact testers
- Plasma etchers
- Velocity transducers
- Pitot tubes
- Spectrum analyzers
- Dynamometers
- Cryogenic apparatus
- Rapid thermal processing systems
- Digital particle image velocimeters
- X ray tubes
- Scanning electron microscopes SEM
- Interferometric microscopes
- Torsional converters
- Evaporation systems
- Force transducers
- Video editing equipment
- Wire electrical discharge machines
- Stylus profilometers
- Position transducers
- Ellipsometers
- X ray radiographic systems
- Laser Doppler velocimeters LDV
- Oscilloscopes
- Interferometers
- C
- Reverse engineering software
- Optical analysis software
- Hewlett-Packard HP Graphics Language HPGL
- G-code
- C++
- COSMOSWorks
- ReliaSoft Alta 6 Pro
- Microsoft Office
- Intergraph Plant Design System PDS
- Microsoft Project
- Adobe Systems Adobe Illustrator
- Autodesk Revit
- Accelerated life testing software
- Computational fluid dynamics CFD software
- Rockwell Automation
- Reliability analysis software
- Bill of materials software
- The MathWorks MATLAB
- Microsoft Access
- Design of experiments DOE software
- Rapid prototyping software
- InnovMetric PolyWorks
- Blue Ridge Numerics CFDesign
- SAP
- Computer aided manufacturing CAM software
- ANSYS
- MUMPS M
- Minitab
- Metrix Imageware Surfacer
- Motion analysis software
- ESRI ArcGIS software
- Lambda Research OSLO
- Bentley MicroStation
- Adobe Systems Adobe ActionScript
- Microsoft Word
- Dassault Systemes CATIA
- Finite element method FEM software
- Video analysis software
- National Instruments LabVIEW
- IBM Notes
- Cost estimation software
- Modal analysis software
- Microsoft Visio
- Human machine interface HMI software
- Failure mode and effects analysis FMEA software
- Dassault Systems SOLIDWORKS
- Statistical energy analysis SEA software
- PTC Creo Parametric
- Zemax
- Oracle Primavera Enterprise Project Portfolio Management
- Life cycle cost software
- Computer numerical control CNC software
- Autodesk AutoCAD Civil 3D
- Statistical software
- Sigmetrix CETOL 6 Sigma
- Computer aided design and drafting software CADD
- Verilog
- UGS I-DEAS
- Microsoft Excel
- Autodesk AutoCAD
- Mesh generation software
- Grid generation software
- 1CadCam Unigraphics
- ReliaSoft BlockSim
- ReliaSoft Weibull++ 6
- Data acquisition software
- Ladder Logic
- Microsoft PowerPoint
- Mathsoft Mathcad
- Failure assessment software
- Microsoft Visual Basic
- MAYA Nastran