Will “Distribution Field Technician” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Corrosion Technician
Tasks for “Distribution Field Technician”
- Integrate hot water heater systems with geothermal heat exchange systems.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Backfill piping trenches to protect pipes from damage.
- Install and maintain geothermal plant electrical protection equipment.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Adjust power production systems to meet load and distribution demands.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Test water sources for factors such as flow volume and contaminant presence.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Collect and record data associated with operating geothermal power plants or well fields.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Install and maintain geothermal system instrumentation or controls.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Identify equipment options, such as compressors, and make appropriate selections.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
Related Technology & Tools
- Grout pumps
- Coil tubing units
- Pyrometers
- Tracked excavators
- Safety gloves
- Portable welding equipment
- Wire cutters
- Air wrenches
- Deburring tools
- Pipe cutters
- Wire strippers
- Valve wrenches
- Trench compacters
- Safety glasses
- Grout mixers
- Pavement saws
- Adjustable pipe wrenches
- Socket wrench sets
- Adjustable hand wrenches
- Air monitoring equipment
- Programmable logic controllers PLC
- Pipe squeeze off tools
- Desktop computers
- Alignment clamps
- Well drilling rigs
- Laptop computers
- Straight screwdrivers
- Ratchet sets
- Personal computers
- Protective respirators
- Claw hammers
- Butt fusion machines
- Phillips head screwdrivers
- Depth meters
- Channel lock pliers
- Autodesk AutoCAD
- ClimateMaster GeoDesigner
- Email software
- Microsoft Word
- Microsoft Excel
- Microsoft Office
- Thermal Dynamics Ground Loop Design GLD
- WaterFurnace International Ground Loop Design PREMIER
- SAP
- Geothermal Properties Measurement Tool
- Distributed control system DCS