Will “Instrumentation, Control, and Electrical Technician (I C & E Technician)” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Instrumentation, Control, and Electrical Technician (I C & E Technician)”
- Install and maintain geothermal system instrumentation or controls.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Collect and record data associated with operating geothermal power plants or well fields.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Test water sources for factors such as flow volume and contaminant presence.
- Install and maintain geothermal plant electrical protection equipment.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Identify equipment options, such as compressors, and make appropriate selections.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Backfill piping trenches to protect pipes from damage.
- Adjust power production systems to meet load and distribution demands.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
Related Technology & Tools
- Safety glasses
- Butt fusion machines
- Air wrenches
- Grout mixers
- Personal computers
- Deburring tools
- Claw hammers
- Desktop computers
- Protective respirators
- Alignment clamps
- Pipe squeeze off tools
- Adjustable hand wrenches
- Programmable logic controllers PLC
- Pipe cutters
- Pavement saws
- Air monitoring equipment
- Channel lock pliers
- Straight screwdrivers
- Phillips head screwdrivers
- Socket wrench sets
- Pyrometers
- Trench compacters
- Grout pumps
- Portable welding equipment
- Depth meters
- Safety gloves
- Wire strippers
- Valve wrenches
- Tracked excavators
- Coil tubing units
- Wire cutters
- Ratchet sets
- Well drilling rigs
- Laptop computers
- Adjustable pipe wrenches
- ClimateMaster GeoDesigner
- WaterFurnace International Ground Loop Design PREMIER
- Geothermal Properties Measurement Tool
- Autodesk AutoCAD
- Distributed control system DCS
- Microsoft Word
- SAP
- Microsoft Excel
- Thermal Dynamics Ground Loop Design GLD
- Email software
- Microsoft Office