Will “Maintenance Technician” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Maintenance Technician
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Maintenance Technician”
- Identify equipment options, such as compressors, and make appropriate selections.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Collect and record data associated with operating geothermal power plants or well fields.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Test water sources for factors such as flow volume and contaminant presence.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Install and maintain geothermal plant electrical protection equipment.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Install and maintain geothermal system instrumentation or controls.
- Backfill piping trenches to protect pipes from damage.
- Adjust power production systems to meet load and distribution demands.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
Related Technology & Tools
- Safety glasses
- Safety gloves
- Adjustable pipe wrenches
- Wire cutters
- Straight screwdrivers
- Air wrenches
- Phillips head screwdrivers
- Grout mixers
- Depth meters
- Butt fusion machines
- Pipe squeeze off tools
- Desktop computers
- Personal computers
- Programmable logic controllers PLC
- Grout pumps
- Ratchet sets
- Laptop computers
- Wire strippers
- Trench compacters
- Alignment clamps
- Pyrometers
- Deburring tools
- Socket wrench sets
- Well drilling rigs
- Claw hammers
- Protective respirators
- Pipe cutters
- Coil tubing units
- Valve wrenches
- Portable welding equipment
- Air monitoring equipment
- Pavement saws
- Tracked excavators
- Adjustable hand wrenches
- Channel lock pliers
- Microsoft Excel
- Autodesk AutoCAD
- WaterFurnace International Ground Loop Design PREMIER
- ClimateMaster GeoDesigner
- Microsoft Office
- Email software
- Geothermal Properties Measurement Tool
- Thermal Dynamics Ground Loop Design GLD
- Distributed control system DCS
- Microsoft Word
- SAP