Will “Mechanic” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Mechanic”
- Identify equipment options, such as compressors, and make appropriate selections.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Install and maintain geothermal system instrumentation or controls.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Adjust power production systems to meet load and distribution demands.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Backfill piping trenches to protect pipes from damage.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Test water sources for factors such as flow volume and contaminant presence.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Collect and record data associated with operating geothermal power plants or well fields.
- Install and maintain geothermal plant electrical protection equipment.
Related Technology & Tools
- Tracked excavators
- Safety glasses
- Pipe squeeze off tools
- Pyrometers
- Programmable logic controllers PLC
- Straight screwdrivers
- Air wrenches
- Butt fusion machines
- Well drilling rigs
- Channel lock pliers
- Air monitoring equipment
- Grout pumps
- Protective respirators
- Depth meters
- Desktop computers
- Claw hammers
- Wire strippers
- Deburring tools
- Personal computers
- Portable welding equipment
- Valve wrenches
- Pipe cutters
- Grout mixers
- Trench compacters
- Coil tubing units
- Pavement saws
- Ratchet sets
- Socket wrench sets
- Safety gloves
- Wire cutters
- Laptop computers
- Adjustable pipe wrenches
- Phillips head screwdrivers
- Alignment clamps
- Adjustable hand wrenches
- Microsoft Office
- Geothermal Properties Measurement Tool
- SAP
- Email software
- Microsoft Word
- Distributed control system DCS
- Microsoft Excel
- ClimateMaster GeoDesigner
- Thermal Dynamics Ground Loop Design GLD
- WaterFurnace International Ground Loop Design PREMIER
- Autodesk AutoCAD