Will “Control Operator” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
- Control Operator
Tasks for “Control Operator”
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Backfill piping trenches to protect pipes from damage.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Install and maintain geothermal plant electrical protection equipment.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Identify equipment options, such as compressors, and make appropriate selections.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Adjust power production systems to meet load and distribution demands.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Install and maintain geothermal system instrumentation or controls.
- Test water sources for factors such as flow volume and contaminant presence.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Collect and record data associated with operating geothermal power plants or well fields.
Related Technology & Tools
- Wire cutters
- Safety gloves
- Pavement saws
- Adjustable pipe wrenches
- Wire strippers
- Phillips head screwdrivers
- Channel lock pliers
- Alignment clamps
- Portable welding equipment
- Grout pumps
- Valve wrenches
- Programmable logic controllers PLC
- Claw hammers
- Coil tubing units
- Pipe cutters
- Pipe squeeze off tools
- Personal computers
- Laptop computers
- Depth meters
- Ratchet sets
- Desktop computers
- Tracked excavators
- Butt fusion machines
- Well drilling rigs
- Grout mixers
- Safety glasses
- Deburring tools
- Trench compacters
- Protective respirators
- Socket wrench sets
- Straight screwdrivers
- Air wrenches
- Adjustable hand wrenches
- Air monitoring equipment
- Pyrometers
- Thermal Dynamics Ground Loop Design GLD
- Email software
- Microsoft Word
- Microsoft Office
- Autodesk AutoCAD
- Distributed control system DCS
- Geothermal Properties Measurement Tool
- Microsoft Excel
- WaterFurnace International Ground Loop Design PREMIER
- ClimateMaster GeoDesigner
- SAP