Will “Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)”
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Collect and record data associated with operating geothermal power plants or well fields.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Identify equipment options, such as compressors, and make appropriate selections.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Install and maintain geothermal plant electrical protection equipment.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Adjust power production systems to meet load and distribution demands.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Backfill piping trenches to protect pipes from damage.
- Test water sources for factors such as flow volume and contaminant presence.
- Install and maintain geothermal system instrumentation or controls.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
Related Technology & Tools
- Wire strippers
- Well drilling rigs
- Deburring tools
- Channel lock pliers
- Tracked excavators
- Desktop computers
- Safety glasses
- Pipe squeeze off tools
- Phillips head screwdrivers
- Coil tubing units
- Air wrenches
- Depth meters
- Air monitoring equipment
- Socket wrench sets
- Alignment clamps
- Adjustable hand wrenches
- Laptop computers
- Pipe cutters
- Adjustable pipe wrenches
- Straight screwdrivers
- Safety gloves
- Personal computers
- Protective respirators
- Portable welding equipment
- Pavement saws
- Wire cutters
- Grout mixers
- Programmable logic controllers PLC
- Ratchet sets
- Grout pumps
- Trench compacters
- Pyrometers
- Claw hammers
- Valve wrenches
- Butt fusion machines
- Email software
- Autodesk AutoCAD
- Thermal Dynamics Ground Loop Design GLD
- Geothermal Properties Measurement Tool
- WaterFurnace International Ground Loop Design PREMIER
- Microsoft Word
- Microsoft Office
- Distributed control system DCS
- SAP
- ClimateMaster GeoDesigner
- Microsoft Excel