Will “Bronzer” be Replaced By Robots? 🤔
69% Chance of Automation
“Bronzer” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Bronzer”
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Select the correct spray gun system for the material being applied.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Allow the sprayed product to dry and touch up any missed spots.
- Buff and wax the finished paintwork.
- Apply primer over any repairs made to vehicle surfaces.
- Sand and apply sealer to properly dried vehicle finish.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Dispose of hazardous waste in an appropriate manner.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Verify paint consistency, using a viscosity meter.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Clean equipment and work areas.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Apply rust-resistant undercoats and caulk and seal seams.
Related Technology & Tools
- Paint application rollers
- Power buffers
- Adjustable hand wrenches
- Pallet jacks
- Safety goggles
- Wire brushes
- Tungsten inert gas TIG welding equipment
- Viscosity meters
- Air compressors
- Hot air guns
- Paint application brushes
- Metal inert gas MIG welding equipment
- Paint sprayguns
- Shielded arc welding tools
- Forklifts
- Portable buffers
- Computer terminals
- Robotic paint equipment
- Safety gloves
- Paint booths
- Paint stencils
- Exhaust units
- Step ladders
- Power paint mixers
- Plasma cutters
- Power sanders
- Oxyacetylene welding equipment
- Straight screwdrivers
- Infrared drying lamps
- Hydraulic jacks
- Respiratory protection equipment
- Blow torches
- Desktop computers
- Rivet guns
- Power drills
- Manlift buckets
- Sandblasters
- Safety glasses
- Claw hammers
- Scaffolding
- Hoisting equipment
- Microsoft Excel
- Microsoft Outlook
- Microsoft Word
- Inventory control software
- Robotic painting software
- Data entry software
- Maintenance management software
- Scheduling software