Will “Colorman” be Replaced By Robots? 🤔
69% Chance of Automation
“Colorman” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Colorman”
- Clean equipment and work areas.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Verify paint consistency, using a viscosity meter.
- Apply rust-resistant undercoats and caulk and seal seams.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Select the correct spray gun system for the material being applied.
- Allow the sprayed product to dry and touch up any missed spots.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Apply primer over any repairs made to vehicle surfaces.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Sand and apply sealer to properly dried vehicle finish.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Dispose of hazardous waste in an appropriate manner.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Buff and wax the finished paintwork.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
Related Technology & Tools
- Hot air guns
- Tungsten inert gas TIG welding equipment
- Forklifts
- Infrared drying lamps
- Air compressors
- Safety gloves
- Paint booths
- Power drills
- Hydraulic jacks
- Paint application brushes
- Paint application rollers
- Exhaust units
- Oxyacetylene welding equipment
- Portable buffers
- Sandblasters
- Blow torches
- Wire brushes
- Viscosity meters
- Power paint mixers
- Computer terminals
- Respiratory protection equipment
- Rivet guns
- Hoisting equipment
- Power sanders
- Safety glasses
- Shielded arc welding tools
- Pallet jacks
- Paint stencils
- Safety goggles
- Step ladders
- Adjustable hand wrenches
- Desktop computers
- Scaffolding
- Robotic paint equipment
- Plasma cutters
- Power buffers
- Claw hammers
- Straight screwdrivers
- Paint sprayguns
- Metal inert gas MIG welding equipment
- Manlift buckets
- Microsoft Word
- Microsoft Excel
- Data entry software
- Scheduling software
- Microsoft Outlook
- Maintenance management software
- Robotic painting software
- Inventory control software