Will “Sandblaster Paint Sprayer” be Replaced By Robots? 🤔
69% Chance of Automation
“Sandblaster Paint Sprayer” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Sandblaster Paint Sprayer”
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Verify paint consistency, using a viscosity meter.
- Allow the sprayed product to dry and touch up any missed spots.
- Apply rust-resistant undercoats and caulk and seal seams.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Dispose of hazardous waste in an appropriate manner.
- Select the correct spray gun system for the material being applied.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Clean equipment and work areas.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Sand and apply sealer to properly dried vehicle finish.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Apply primer over any repairs made to vehicle surfaces.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Buff and wax the finished paintwork.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
Related Technology & Tools
- Adjustable hand wrenches
- Oxyacetylene welding equipment
- Computer terminals
- Forklifts
- Tungsten inert gas TIG welding equipment
- Plasma cutters
- Power buffers
- Respiratory protection equipment
- Hoisting equipment
- Manlift buckets
- Safety goggles
- Scaffolding
- Exhaust units
- Safety glasses
- Paint sprayguns
- Viscosity meters
- Safety gloves
- Robotic paint equipment
- Wire brushes
- Straight screwdrivers
- Rivet guns
- Shielded arc welding tools
- Pallet jacks
- Paint application rollers
- Hot air guns
- Metal inert gas MIG welding equipment
- Infrared drying lamps
- Paint application brushes
- Claw hammers
- Power sanders
- Paint booths
- Power drills
- Sandblasters
- Desktop computers
- Power paint mixers
- Portable buffers
- Air compressors
- Step ladders
- Paint stencils
- Hydraulic jacks
- Blow torches
- Microsoft Outlook
- Inventory control software
- Microsoft Word
- Maintenance management software
- Robotic painting software
- Scheduling software
- Microsoft Excel
- Data entry software