Will “Automotive Paint Technician (Auto Paint Technician)” be Replaced By Robots? 🤔
69% Chance of Automation
“Automotive Paint Technician (Auto Paint Technician)” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Automotive Paint Technician (Auto Paint Technician)
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Automotive Paint Technician (Auto Paint Technician)”
- Dispose of hazardous waste in an appropriate manner.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Buff and wax the finished paintwork.
- Clean equipment and work areas.
- Verify paint consistency, using a viscosity meter.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Allow the sprayed product to dry and touch up any missed spots.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Apply primer over any repairs made to vehicle surfaces.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Apply rust-resistant undercoats and caulk and seal seams.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Select the correct spray gun system for the material being applied.
- Sand and apply sealer to properly dried vehicle finish.
Related Technology & Tools
- Shielded arc welding tools
- Paint application brushes
- Viscosity meters
- Rivet guns
- Power sanders
- Power paint mixers
- Metal inert gas MIG welding equipment
- Desktop computers
- Safety gloves
- Portable buffers
- Hot air guns
- Paint stencils
- Computer terminals
- Straight screwdrivers
- Air compressors
- Scaffolding
- Power buffers
- Plasma cutters
- Wire brushes
- Power drills
- Safety goggles
- Safety glasses
- Paint application rollers
- Exhaust units
- Blow torches
- Step ladders
- Forklifts
- Pallet jacks
- Infrared drying lamps
- Respiratory protection equipment
- Manlift buckets
- Claw hammers
- Adjustable hand wrenches
- Paint sprayguns
- Oxyacetylene welding equipment
- Sandblasters
- Hoisting equipment
- Paint booths
- Robotic paint equipment
- Hydraulic jacks
- Tungsten inert gas TIG welding equipment
- Scheduling software
- Maintenance management software
- Microsoft Excel
- Data entry software
- Inventory control software
- Robotic painting software
- Microsoft Outlook
- Microsoft Word