Will “Automotive Paint Technician (Auto Paint Technician)” be Replaced By Robots? 🤔
69% Chance of Automation
“Automotive Paint Technician (Auto Paint Technician)” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Automotive Paint Technician (Auto Paint Technician)”
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Clean equipment and work areas.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Allow the sprayed product to dry and touch up any missed spots.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Buff and wax the finished paintwork.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Apply primer over any repairs made to vehicle surfaces.
- Dispose of hazardous waste in an appropriate manner.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Sand and apply sealer to properly dried vehicle finish.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Apply rust-resistant undercoats and caulk and seal seams.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Select the correct spray gun system for the material being applied.
- Verify paint consistency, using a viscosity meter.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
Related Technology & Tools
- Straight screwdrivers
- Desktop computers
- Paint stencils
- Forklifts
- Portable buffers
- Infrared drying lamps
- Power sanders
- Claw hammers
- Rivet guns
- Power drills
- Safety goggles
- Power paint mixers
- Adjustable hand wrenches
- Safety gloves
- Paint sprayguns
- Paint application rollers
- Air compressors
- Robotic paint equipment
- Pallet jacks
- Hydraulic jacks
- Oxyacetylene welding equipment
- Step ladders
- Sandblasters
- Respiratory protection equipment
- Computer terminals
- Hoisting equipment
- Shielded arc welding tools
- Hot air guns
- Paint booths
- Metal inert gas MIG welding equipment
- Paint application brushes
- Safety glasses
- Power buffers
- Tungsten inert gas TIG welding equipment
- Plasma cutters
- Scaffolding
- Exhaust units
- Wire brushes
- Manlift buckets
- Blow torches
- Viscosity meters
- Microsoft Excel
- Scheduling software
- Microsoft Word
- Data entry software
- Microsoft Outlook
- Inventory control software
- Maintenance management software
- Robotic painting software