Will “Shipyard Painter” be Replaced By Robots? 🤔
69% Chance of Automation
“Shipyard Painter” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Shipyard Painter”
- Verify paint consistency, using a viscosity meter.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Dispose of hazardous waste in an appropriate manner.
- Apply primer over any repairs made to vehicle surfaces.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Apply rust-resistant undercoats and caulk and seal seams.
- Clean equipment and work areas.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Buff and wax the finished paintwork.
- Sand and apply sealer to properly dried vehicle finish.
- Select the correct spray gun system for the material being applied.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Allow the sprayed product to dry and touch up any missed spots.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
Related Technology & Tools
- Paint application rollers
- Respiratory protection equipment
- Paint sprayguns
- Safety glasses
- Power drills
- Hot air guns
- Adjustable hand wrenches
- Air compressors
- Blow torches
- Paint application brushes
- Viscosity meters
- Power paint mixers
- Exhaust units
- Robotic paint equipment
- Sandblasters
- Wire brushes
- Plasma cutters
- Portable buffers
- Shielded arc welding tools
- Tungsten inert gas TIG welding equipment
- Scaffolding
- Power buffers
- Oxyacetylene welding equipment
- Infrared drying lamps
- Desktop computers
- Paint booths
- Pallet jacks
- Safety gloves
- Power sanders
- Metal inert gas MIG welding equipment
- Hoisting equipment
- Computer terminals
- Forklifts
- Manlift buckets
- Claw hammers
- Paint stencils
- Step ladders
- Safety goggles
- Rivet guns
- Straight screwdrivers
- Hydraulic jacks
- Data entry software
- Microsoft Excel
- Microsoft Word
- Microsoft Outlook
- Maintenance management software
- Scheduling software
- Inventory control software
- Robotic painting software