Will “Doper” be Replaced By Robots? 🤔
69% Chance of Automation
“Doper” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Doper”
- Verify paint consistency, using a viscosity meter.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Buff and wax the finished paintwork.
- Clean equipment and work areas.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Apply rust-resistant undercoats and caulk and seal seams.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Sand and apply sealer to properly dried vehicle finish.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Apply primer over any repairs made to vehicle surfaces.
- Allow the sprayed product to dry and touch up any missed spots.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Dispose of hazardous waste in an appropriate manner.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Select the correct spray gun system for the material being applied.
Related Technology & Tools
- Manlift buckets
- Claw hammers
- Safety goggles
- Power sanders
- Paint booths
- Adjustable hand wrenches
- Hydraulic jacks
- Viscosity meters
- Straight screwdrivers
- Power paint mixers
- Respiratory protection equipment
- Pallet jacks
- Rivet guns
- Plasma cutters
- Step ladders
- Robotic paint equipment
- Safety gloves
- Tungsten inert gas TIG welding equipment
- Wire brushes
- Portable buffers
- Power drills
- Computer terminals
- Metal inert gas MIG welding equipment
- Blow torches
- Shielded arc welding tools
- Hoisting equipment
- Forklifts
- Paint application brushes
- Paint application rollers
- Air compressors
- Oxyacetylene welding equipment
- Power buffers
- Sandblasters
- Exhaust units
- Paint stencils
- Desktop computers
- Infrared drying lamps
- Scaffolding
- Paint sprayguns
- Safety glasses
- Hot air guns
- Microsoft Word
- Maintenance management software
- Microsoft Outlook
- Data entry software
- Robotic painting software
- Microsoft Excel
- Inventory control software
- Scheduling software