Will “Instrument and Controls Technician (I & C Technician)” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Instrument and Controls Technician (I & C Technician)”
- Test water sources for factors such as flow volume and contaminant presence.
- Adjust power production systems to meet load and distribution demands.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Install and maintain geothermal plant electrical protection equipment.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Install and maintain geothermal system instrumentation or controls.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Collect and record data associated with operating geothermal power plants or well fields.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Backfill piping trenches to protect pipes from damage.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Identify equipment options, such as compressors, and make appropriate selections.
Related Technology & Tools
- Phillips head screwdrivers
- Deburring tools
- Wire strippers
- Safety glasses
- Desktop computers
- Ratchet sets
- Depth meters
- Alignment clamps
- Butt fusion machines
- Safety gloves
- Wire cutters
- Portable welding equipment
- Claw hammers
- Pavement saws
- Protective respirators
- Grout pumps
- Pipe squeeze off tools
- Valve wrenches
- Laptop computers
- Straight screwdrivers
- Air monitoring equipment
- Air wrenches
- Trench compacters
- Well drilling rigs
- Socket wrench sets
- Adjustable pipe wrenches
- Adjustable hand wrenches
- Channel lock pliers
- Personal computers
- Pipe cutters
- Programmable logic controllers PLC
- Coil tubing units
- Grout mixers
- Pyrometers
- Tracked excavators
- Autodesk AutoCAD
- Microsoft Word
- Email software
- Microsoft Office
- Distributed control system DCS
- ClimateMaster GeoDesigner
- Thermal Dynamics Ground Loop Design GLD
- SAP
- Microsoft Excel
- Geothermal Properties Measurement Tool
- WaterFurnace International Ground Loop Design PREMIER