Will “Instrumentation and Electrical Technician (I & E Technician)” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9099.01
☝️ Information based on the reference occupation “Geothermal Technicians”.
Also Known As…
- Geothermal Technicians
- Operator Technician
- Operations Technician
- Mechanical Technician
- Maintenance Technician
- Maintenance Mechanic
- Instrumentation, Control, and Electrical Technician (I C & E Technician)
- Instrumentation and Electrical Technician (I & E Technician)
- Instrument and Controls Technician (I & C Technician)
- Control Room Operator (CRO)
- Control Operator
- Pump Technician
- PPO (Power Plant Operator)
- Plant Technician
- Plant Operator
- Plant Mechanic
- Plant Control Operator
- Operator
- Operations and Maintenance Technician
- Mechanic
- Ground Source Heat Pump Technician (GSHP Technician)
- Geothermal Technician
- Geothermal System Installer
- Geothermal Installer
- Geothermal HVAC Technician (Geothermal Heating, Ventilating, and Air Conditioning Technician)
- Geothermal Field Technician
- Distribution Field Technician
- Corrosion Technician
Tasks for “Instrumentation and Electrical Technician (I & E Technician)”
- Integrate hot water heater systems with geothermal heat exchange systems.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Backfill piping trenches to protect pipes from damage.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Operate equipment such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Adjust power production systems to meet load and distribution demands.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install and maintain geothermal system instrumentation or controls.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Collect and record data associated with operating geothermal power plants or well fields.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Install and maintain geothermal plant electrical protection equipment.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Test water sources for factors such as flow volume and contaminant presence.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Identify equipment options, such as compressors, and make appropriate selections.
Related Technology & Tools
- Deburring tools
- Straight screwdrivers
- Trench compacters
- Programmable logic controllers PLC
- Adjustable hand wrenches
- Claw hammers
- Coil tubing units
- Well drilling rigs
- Air wrenches
- Ratchet sets
- Desktop computers
- Pipe cutters
- Air monitoring equipment
- Wire strippers
- Valve wrenches
- Pyrometers
- Portable welding equipment
- Phillips head screwdrivers
- Safety gloves
- Wire cutters
- Pavement saws
- Butt fusion machines
- Depth meters
- Grout pumps
- Socket wrench sets
- Pipe squeeze off tools
- Channel lock pliers
- Personal computers
- Alignment clamps
- Adjustable pipe wrenches
- Tracked excavators
- Grout mixers
- Laptop computers
- Safety glasses
- Protective respirators
- SAP
- Thermal Dynamics Ground Loop Design GLD
- WaterFurnace International Ground Loop Design PREMIER
- Autodesk AutoCAD
- Geothermal Properties Measurement Tool
- ClimateMaster GeoDesigner
- Microsoft Excel
- Email software
- Distributed control system DCS
- Microsoft Word
- Microsoft Office