Will “Cat Cracker Operator” be Replaced By Robots? 🤔
71% Chance of Automation
“Cat Cracker Operator” will maybe be replaced by robots.
This job is ranked #389 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
Job Details
- The SOC (Standard Occupational Classification) code is 51-8093.00
- The Mean Annual Wage in the U.S. is $ 67,870.00
- The Mean Hourly Wage is $ 32.00
- Currently, there are 41,630 people on this job
☝️ Information based on the reference occupation “Petroleum Pump System Operators, Refinery Operators, and Gaugers”.
Also Known As…
- Petroleum Pump System Operators, Refinery Operators, and Gaugers
- Unit Operator
- Stillman
- Refinery Operator
- Pumper
- Outside Operator
- Hydrotreater Operator
- Head Operator
- Gauger
- Crude Unit Operator
- Board Operator
- Transfer Pumper
- Terminal Gauger
- Tank Terminal Gauger
- Refining Equipment Operator
- Refiner
- Pumper Helper
- Pump House Technician
- Product Blending Supervisor
- Process Operator
- Process Control Board Operator
- Pressure Controller
- Plant Operator
- Pipeline Dispatcher
- Pilot Plant Operator
- Petroleum Supply Specialist
- Petroleum Refining Equipment Operator
- Petroleum Refinery Worker
- Petroleum Refinery Operator
- Petroleum Refinery Control Panel Operator
- Petroleum Plant Operator
- Operator
- Operations Boardman
- Oil Refinery Operator
- Oil Refiner
- Oil Pumper
- Oil Process Stillman
- Oil Plant Operator
- Oil Pipeline Operator
- Oil Pipeline Dispatcher
- Oil Gauger
- Hydro Operator
- Houseman
- Gasoline Plant Operator
- Gas Blender
- Fuel Distribution System Operator
- Fractionation Plant Supervisor
- Field Gauger
- Dock Pumper
- Dock Operator
- Control Panel Operator
- Control Operator
- Control Board Operator
- Boiler House Operator
- Blender
- Absorption Plant Operator
Tasks for “Cat Cracker Operator”
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Calculate test result values, using standard formulas.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Coordinate shutdowns and major projects.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Clamp seals around valves to secure tanks.
- Lower thermometers into tanks to obtain temperature readings.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Prepare calculations for receipts and deliveries of oil and oil products.
Related Technology & Tools
- Oil sampling pumps
- Flat cold chisels
- Vacuum trucks
- Multipurpose hammers
- Multipurpose screwdrivers
- Measuring tapes
- Precision file sets
- Oil squirt cans
- Petroleum trucks
- Electric centrifuges
- Calibrated hydrometer
- Chain boomers
- Pipe wrench sets
- Hand centrifuges
- Personal computers
- Compressor control panels
- Punch sets
- Adjustable handwrenches
- Oil field pumps
- Wire cleaning brushes
- Needlenose pliers
- Lease automatic custody transfer LACT units
- Digital feeler gauges
- Moving bars
- Hacksaws
- Petroleum sampling equipment
- Handheld digital thermometers
- Socket sets
- Pocket knives
- Gauge lines
- Vernier calipers
- Wire cutting tools
- Safety goggles
- Fencing pliers
- Pressure testers
- Straight tinners snips
- Laptop computers
- Allen wrench sets
- Groove joint pliers
- Supervisory control and data acquisition SCADA software
- Microsoft Excel
- Microsoft Word
- Email software
- Inventory tracking software