Will “Oil Refinery Operator” be Replaced By Robots? 🤔
71% Chance of Automation
“Oil Refinery Operator” will maybe be replaced by robots.
This job is ranked #389 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
Job Details
- The SOC (Standard Occupational Classification) code is 51-8093.00
- The Mean Annual Wage in the U.S. is $ 67,870.00
- The Mean Hourly Wage is $ 32.00
- Currently, there are 41,630 people on this job
☝️ Information based on the reference occupation “Petroleum Pump System Operators, Refinery Operators, and Gaugers”.
Also Known As…
- Petroleum Pump System Operators, Refinery Operators, and Gaugers
- Unit Operator
- Stillman
- Refinery Operator
- Pumper
- Outside Operator
- Hydrotreater Operator
- Head Operator
- Gauger
- Crude Unit Operator
- Board Operator
- Transfer Pumper
- Terminal Gauger
- Tank Terminal Gauger
- Refining Equipment Operator
- Refiner
- Pumper Helper
- Pump House Technician
- Product Blending Supervisor
- Process Operator
- Process Control Board Operator
- Pressure Controller
- Plant Operator
- Pipeline Dispatcher
- Pilot Plant Operator
- Petroleum Supply Specialist
- Petroleum Refining Equipment Operator
- Petroleum Refinery Worker
- Petroleum Refinery Operator
- Petroleum Refinery Control Panel Operator
- Petroleum Plant Operator
- Operator
- Operations Boardman
- Oil Refiner
- Oil Pumper
- Oil Process Stillman
- Oil Plant Operator
- Oil Pipeline Operator
- Oil Pipeline Dispatcher
- Oil Gauger
- Hydro Operator
- Houseman
- Gasoline Plant Operator
- Gas Blender
- Fuel Distribution System Operator
- Fractionation Plant Supervisor
- Field Gauger
- Dock Pumper
- Dock Operator
- Control Panel Operator
- Control Operator
- Control Board Operator
- Cat Cracker Operator
- Boiler House Operator
- Blender
- Absorption Plant Operator
Tasks for “Oil Refinery Operator”
- Calculate test result values, using standard formulas.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Coordinate shutdowns and major projects.
- Clamp seals around valves to secure tanks.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Lower thermometers into tanks to obtain temperature readings.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
Related Technology & Tools
- Punch sets
- Oil sampling pumps
- Flat cold chisels
- Vernier calipers
- Wire cleaning brushes
- Pressure testers
- Lease automatic custody transfer LACT units
- Calibrated hydrometer
- Adjustable handwrenches
- Electric centrifuges
- Measuring tapes
- Petroleum trucks
- Pocket knives
- Petroleum sampling equipment
- Handheld digital thermometers
- Multipurpose hammers
- Socket sets
- Vacuum trucks
- Moving bars
- Personal computers
- Safety goggles
- Needlenose pliers
- Precision file sets
- Hand centrifuges
- Multipurpose screwdrivers
- Chain boomers
- Wire cutting tools
- Straight tinners snips
- Compressor control panels
- Hacksaws
- Digital feeler gauges
- Groove joint pliers
- Oil squirt cans
- Pipe wrench sets
- Gauge lines
- Oil field pumps
- Laptop computers
- Fencing pliers
- Allen wrench sets
- Microsoft Word
- Supervisory control and data acquisition SCADA software
- Email software
- Inventory tracking software
- Microsoft Excel