Will “Petroleum Pump System Operators, Refinery Operators, and Gaugers” be Replaced By Robots? 🤔
71% Chance of Automation
“Petroleum Pump System Operators, Refinery Operators, and Gaugers” will maybe be replaced by robots.
This job is ranked #389 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
Job Details
- The SOC (Standard Occupational Classification) code is 51-8093.00
- The Mean Annual Wage in the U.S. is $ 67,870.00
- The Mean Hourly Wage is $ 32.00
- Currently, there are 41,630 people on this job
Also Known As…
- Unit Operator
- Stillman
- Refinery Operator
- Pumper
- Outside Operator
- Hydrotreater Operator
- Head Operator
- Gauger
- Crude Unit Operator
- Board Operator
- Transfer Pumper
- Terminal Gauger
- Tank Terminal Gauger
- Refining Equipment Operator
- Refiner
- Pumper Helper
- Pump House Technician
- Product Blending Supervisor
- Process Operator
- Process Control Board Operator
- Pressure Controller
- Plant Operator
- Pipeline Dispatcher
- Pilot Plant Operator
- Petroleum Supply Specialist
- Petroleum Refining Equipment Operator
- Petroleum Refinery Worker
- Petroleum Refinery Operator
- Petroleum Refinery Control Panel Operator
- Petroleum Plant Operator
- Operator
- Operations Boardman
- Oil Refinery Operator
- Oil Refiner
- Oil Pumper
- Oil Process Stillman
- Oil Plant Operator
- Oil Pipeline Operator
- Oil Pipeline Dispatcher
- Oil Gauger
- Hydro Operator
- Houseman
- Gasoline Plant Operator
- Gas Blender
- Fuel Distribution System Operator
- Fractionation Plant Supervisor
- Field Gauger
- Dock Pumper
- Dock Operator
- Control Panel Operator
- Control Operator
- Control Board Operator
- Cat Cracker Operator
- Boiler House Operator
- Blender
- Absorption Plant Operator
Tasks for “Petroleum Pump System Operators, Refinery Operators, and Gaugers”
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Calculate test result values, using standard formulas.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Clamp seals around valves to secure tanks.
- Coordinate shutdowns and major projects.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Lower thermometers into tanks to obtain temperature readings.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
Related Technology & Tools
- Vernier calipers
- Chain boomers
- Safety goggles
- Gauge lines
- Straight tinners snips
- Moving bars
- Pocket knives
- Hacksaws
- Adjustable handwrenches
- Multipurpose screwdrivers
- Measuring tapes
- Calibrated hydrometer
- Oil sampling pumps
- Wire cutting tools
- Digital feeler gauges
- Fencing pliers
- Precision file sets
- Punch sets
- Wire cleaning brushes
- Lease automatic custody transfer LACT units
- Petroleum sampling equipment
- Socket sets
- Oil field pumps
- Electric centrifuges
- Handheld digital thermometers
- Compressor control panels
- Hand centrifuges
- Needlenose pliers
- Flat cold chisels
- Pipe wrench sets
- Multipurpose hammers
- Allen wrench sets
- Vacuum trucks
- Oil squirt cans
- Petroleum trucks
- Personal computers
- Pressure testers
- Groove joint pliers
- Laptop computers
- Supervisory control and data acquisition SCADA software
- Microsoft Word
- Microsoft Excel
- Inventory tracking software
- Email software