Will “Automotive Painter” be Replaced By Robots? 🤔
69% Chance of Automation
“Automotive Painter” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Automotive Painter”
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Dispose of hazardous waste in an appropriate manner.
- Verify paint consistency, using a viscosity meter.
- Sand and apply sealer to properly dried vehicle finish.
- Apply primer over any repairs made to vehicle surfaces.
- Select the correct spray gun system for the material being applied.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Apply rust-resistant undercoats and caulk and seal seams.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Buff and wax the finished paintwork.
- Clean equipment and work areas.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Allow the sprayed product to dry and touch up any missed spots.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
Related Technology & Tools
- Straight screwdrivers
- Manlift buckets
- Portable buffers
- Infrared drying lamps
- Hoisting equipment
- Viscosity meters
- Adjustable hand wrenches
- Metal inert gas MIG welding equipment
- Step ladders
- Safety gloves
- Hydraulic jacks
- Wire brushes
- Respiratory protection equipment
- Paint application rollers
- Safety glasses
- Pallet jacks
- Computer terminals
- Rivet guns
- Power drills
- Sandblasters
- Forklifts
- Claw hammers
- Paint booths
- Tungsten inert gas TIG welding equipment
- Air compressors
- Paint sprayguns
- Paint application brushes
- Scaffolding
- Paint stencils
- Safety goggles
- Robotic paint equipment
- Blow torches
- Plasma cutters
- Power paint mixers
- Shielded arc welding tools
- Desktop computers
- Exhaust units
- Power sanders
- Power buffers
- Hot air guns
- Oxyacetylene welding equipment
- Microsoft Word
- Inventory control software
- Scheduling software
- Maintenance management software
- Microsoft Outlook
- Data entry software
- Microsoft Excel
- Robotic painting software