Will “Finish Painter” be Replaced By Robots? 🤔
69% Chance of Automation
“Finish Painter” will maybe be replaced by robots.
This job is ranked #382 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes. Includes painters in auto body repair facilities.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9122.00
- The Mean Annual Wage in the U.S. is $ 46,270.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 54,860 people on this job
☝️ Information based on the reference occupation “Painters, Transportation Equipment”.
Also Known As…
- Painters, Transportation Equipment
- Top Coater
- Paint Technician
- Paint Prepper
- Finish Painter
- Body Technician/Painter
- Automotive Refinish Technician
- Automotive Painter
- Automotive Paint Technician (Auto Paint Technician)
- Auto Refinisher (Automobile Refinisher)
- Auto Painter (Automobile Painter)
- Vehicle Painter
- Transportation Equipment Painter Apprentice
- Transportation Equipment Painter
- Touch Up Painter
- Shipyard Painter
- Sandblaster Paint Sprayer
- Rust Proofer
- Refinish Technician
- Railroad Car Painter
- Railroad Car Letterer
- Pressure Washer
- Paint Specialist
- Paint Prep Technician
- Mobile Paint Specialist
- Industrial Painter
- Duco Polisher
- Doper
- Dopeman
- Dope Sprayer
- Colorman
- Car Painter
- Bronzer
- Boat Painter
- Black Off Worker
- Auto Striper
- Aircraft Painter Apprentice
- Aircraft Painter
Tasks for “Finish Painter”
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Sand vehicle surfaces between coats of paint or primer to remove flaws and enhance adhesion for subsequent coats.
- Remove accessories, such as chrome or mirrors, from vehicles and mask other surfaces with tape or paper to protect them from paint.
- Apply rust-resistant undercoats and caulk and seal seams.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Clean equipment and work areas.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of vehicles between coats.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Select paint according to company requirements and match paint colors, following specified color charts.
- Verify paint consistency, using a viscosity meter.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Sand and apply sealer to properly dried vehicle finish.
- Allow the sprayed product to dry and touch up any missed spots.
- Mix paints to match color specifications or vehicles' original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare vehicles for painting.
- Select the correct spray gun system for the material being applied.
- Lay out logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, or patterns.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Apply primer over any repairs made to vehicle surfaces.
- Dispose of hazardous waste in an appropriate manner.
- Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
- Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Buff and wax the finished paintwork.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
Related Technology & Tools
- Step ladders
- Safety goggles
- Manlift buckets
- Plasma cutters
- Sandblasters
- Desktop computers
- Portable buffers
- Power drills
- Air compressors
- Computer terminals
- Pallet jacks
- Safety gloves
- Paint application rollers
- Hoisting equipment
- Paint sprayguns
- Oxyacetylene welding equipment
- Robotic paint equipment
- Viscosity meters
- Metal inert gas MIG welding equipment
- Power buffers
- Exhaust units
- Rivet guns
- Adjustable hand wrenches
- Respiratory protection equipment
- Scaffolding
- Power paint mixers
- Straight screwdrivers
- Shielded arc welding tools
- Claw hammers
- Hydraulic jacks
- Infrared drying lamps
- Safety glasses
- Power sanders
- Forklifts
- Paint booths
- Blow torches
- Paint application brushes
- Tungsten inert gas TIG welding equipment
- Paint stencils
- Wire brushes
- Hot air guns
- Data entry software
- Microsoft Outlook
- Microsoft Word
- Robotic painting software
- Microsoft Excel
- Maintenance management software
- Inventory control software
- Scheduling software