Will “Oil Distributor Tender” be Replaced By Robots? 🤔
89% Chance of Automation
“Oil Distributor Tender” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Oil Distributor Tender”
- Clean or make minor repairs to machines or equipment.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Clean, grade, or level ballast on railroad tracks.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Weld sections of track together, such as switch points and frogs.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Cut rails to specified lengths, using rail saws.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Repair or adjust track switches, using wrenches and replacement parts.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
Related Technology & Tools
- Claw bars
- Precision tape measures
- Track-wrench machines
- Vernier calipers
- Dollies
- Spike pullers
- Safety glasses
- Air drills
- Rail drills
- Welders
- Global positioning system GPS receivers
- Tracked bulldozers
- Weed cutters
- Rail tongs
- Light pickup trucks
- Dump trucks
- Gas-powered wrenches
- Portable track loading fixtures
- Grease guns
- Jackhammers
- Rail saws
- Air-powered wrenches
- Precision files
- Pesticide sprayers
- Hi-rail vehicles
- Shielded arc welding tools
- Safety gloves
- Power washers
- Track chisels
- Laptop computers
- Rail benders
- Picks
- Pneumatic hammers
- Power grinders
- Protective ear plugs
- Shovels
- Crowbars
- Hard hats
- Rail profile grinders
- Tamping machines
- Handheld computers
- Hydraulic jacks
- Air purifying respirators
- Forklifts
- Backhoes
- Rail-mounted cranes
- Oxyacetylene torches
- Adjustable hand wrenches
- Grading equipment
- Fall protection harnesses
- Timekeeping software
- Microsoft Excel
- Data entry software