Will “Track Machine Operator Repairer” be Replaced By Robots? 🤔
89% Chance of Automation
“Track Machine Operator Repairer” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Track Machine Operator Repairer”
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Repair or adjust track switches, using wrenches and replacement parts.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Clean or make minor repairs to machines or equipment.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Weld sections of track together, such as switch points and frogs.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Clean, grade, or level ballast on railroad tracks.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Cut rails to specified lengths, using rail saws.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
Related Technology & Tools
- Tamping machines
- Weed cutters
- Tracked bulldozers
- Hi-rail vehicles
- Spike pullers
- Light pickup trucks
- Laptop computers
- Shovels
- Crowbars
- Welders
- Air-powered wrenches
- Rail tongs
- Dollies
- Rail-mounted cranes
- Protective ear plugs
- Handheld computers
- Grease guns
- Precision files
- Rail saws
- Claw bars
- Air drills
- Hard hats
- Vernier calipers
- Pneumatic hammers
- Oxyacetylene torches
- Track chisels
- Grading equipment
- Gas-powered wrenches
- Power grinders
- Shielded arc welding tools
- Pesticide sprayers
- Safety gloves
- Dump trucks
- Precision tape measures
- Air purifying respirators
- Rail benders
- Fall protection harnesses
- Rail profile grinders
- Power washers
- Adjustable hand wrenches
- Forklifts
- Picks
- Jackhammers
- Safety glasses
- Rail drills
- Hydraulic jacks
- Backhoes
- Global positioning system GPS receivers
- Portable track loading fixtures
- Track-wrench machines
- Microsoft Excel
- Data entry software
- Timekeeping software