Will “Track Repair Worker” be Replaced By Robots? 🤔
89% Chance of Automation
“Track Repair Worker” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Track Repair Worker”
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Repair or adjust track switches, using wrenches and replacement parts.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Cut rails to specified lengths, using rail saws.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Clean or make minor repairs to machines or equipment.
- Weld sections of track together, such as switch points and frogs.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Clean, grade, or level ballast on railroad tracks.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
Related Technology & Tools
- Crowbars
- Claw bars
- Track chisels
- Precision files
- Air-powered wrenches
- Forklifts
- Weed cutters
- Shielded arc welding tools
- Precision tape measures
- Hard hats
- Safety gloves
- Fall protection harnesses
- Rail-mounted cranes
- Tracked bulldozers
- Grease guns
- Light pickup trucks
- Global positioning system GPS receivers
- Rail tongs
- Air drills
- Rail drills
- Power grinders
- Air purifying respirators
- Pneumatic hammers
- Tamping machines
- Pesticide sprayers
- Rail saws
- Protective ear plugs
- Laptop computers
- Dollies
- Gas-powered wrenches
- Track-wrench machines
- Safety glasses
- Welders
- Picks
- Adjustable hand wrenches
- Dump trucks
- Oxyacetylene torches
- Shovels
- Jackhammers
- Portable track loading fixtures
- Spike pullers
- Rail profile grinders
- Backhoes
- Rail benders
- Vernier calipers
- Hi-rail vehicles
- Grading equipment
- Handheld computers
- Hydraulic jacks
- Power washers
- Data entry software
- Timekeeping software
- Microsoft Excel