Will “Track Supervisor” be Replaced By Robots? 🤔
89% Chance of Automation
“Track Supervisor” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Supervisor
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Track Supervisor”
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Weld sections of track together, such as switch points and frogs.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Cut rails to specified lengths, using rail saws.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Clean, grade, or level ballast on railroad tracks.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Clean or make minor repairs to machines or equipment.
- Repair or adjust track switches, using wrenches and replacement parts.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
Related Technology & Tools
- Crowbars
- Jackhammers
- Backhoes
- Rail profile grinders
- Handheld computers
- Safety glasses
- Pesticide sprayers
- Protective ear plugs
- Rail tongs
- Power grinders
- Rail benders
- Hard hats
- Welders
- Track-wrench machines
- Air-powered wrenches
- Gas-powered wrenches
- Power washers
- Oxyacetylene torches
- Hi-rail vehicles
- Grading equipment
- Weed cutters
- Tracked bulldozers
- Rail saws
- Vernier calipers
- Laptop computers
- Air purifying respirators
- Tamping machines
- Shielded arc welding tools
- Hydraulic jacks
- Shovels
- Global positioning system GPS receivers
- Dump trucks
- Air drills
- Forklifts
- Fall protection harnesses
- Rail-mounted cranes
- Track chisels
- Portable track loading fixtures
- Grease guns
- Pneumatic hammers
- Claw bars
- Rail drills
- Precision tape measures
- Light pickup trucks
- Precision files
- Safety gloves
- Picks
- Dollies
- Adjustable hand wrenches
- Spike pullers
- Data entry software
- Timekeeping software
- Microsoft Excel