Will “Slab Lifting Supervisor” be Replaced By Robots? 🤔
89% Chance of Automation
“Slab Lifting Supervisor” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Slab Lifting Supervisor”
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Repair or adjust track switches, using wrenches and replacement parts.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Cut rails to specified lengths, using rail saws.
- Clean, grade, or level ballast on railroad tracks.
- Weld sections of track together, such as switch points and frogs.
- Clean or make minor repairs to machines or equipment.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
Related Technology & Tools
- Jackhammers
- Spike pullers
- Air-powered wrenches
- Precision tape measures
- Protective ear plugs
- Grease guns
- Vernier calipers
- Track chisels
- Precision files
- Claw bars
- Hard hats
- Rail-mounted cranes
- Air purifying respirators
- Rail profile grinders
- Track-wrench machines
- Hydraulic jacks
- Grading equipment
- Safety glasses
- Global positioning system GPS receivers
- Shovels
- Tracked bulldozers
- Power washers
- Weed cutters
- Pneumatic hammers
- Picks
- Portable track loading fixtures
- Crowbars
- Light pickup trucks
- Backhoes
- Handheld computers
- Laptop computers
- Dollies
- Oxyacetylene torches
- Rail tongs
- Fall protection harnesses
- Gas-powered wrenches
- Rail drills
- Power grinders
- Shielded arc welding tools
- Forklifts
- Safety gloves
- Rail benders
- Hi-rail vehicles
- Pesticide sprayers
- Adjustable hand wrenches
- Rail saws
- Tamping machines
- Air drills
- Welders
- Dump trucks
- Timekeeping software
- Microsoft Excel
- Data entry software