Will “Track Moving Machine Operator” be Replaced By Robots? 🤔
89% Chance of Automation
“Track Moving Machine Operator” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Track Moving Machine Operator”
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Repair or adjust track switches, using wrenches and replacement parts.
- Weld sections of track together, such as switch points and frogs.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Cut rails to specified lengths, using rail saws.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Clean, grade, or level ballast on railroad tracks.
- Clean or make minor repairs to machines or equipment.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
Related Technology & Tools
- Protective ear plugs
- Spike pullers
- Jackhammers
- Precision files
- Rail profile grinders
- Dollies
- Safety glasses
- Handheld computers
- Rail tongs
- Backhoes
- Shielded arc welding tools
- Rail-mounted cranes
- Pesticide sprayers
- Shovels
- Rail drills
- Power washers
- Crowbars
- Tracked bulldozers
- Air purifying respirators
- Rail saws
- Welders
- Air-powered wrenches
- Grading equipment
- Track chisels
- Air drills
- Adjustable hand wrenches
- Power grinders
- Tamping machines
- Weed cutters
- Track-wrench machines
- Safety gloves
- Forklifts
- Oxyacetylene torches
- Light pickup trucks
- Hydraulic jacks
- Claw bars
- Laptop computers
- Precision tape measures
- Hard hats
- Global positioning system GPS receivers
- Grease guns
- Rail benders
- Picks
- Vernier calipers
- Hi-rail vehicles
- Fall protection harnesses
- Portable track loading fixtures
- Gas-powered wrenches
- Pneumatic hammers
- Dump trucks
- Timekeeping software
- Data entry software
- Microsoft Excel