Will “Section Gang” be Replaced By Robots? 🤔
89% Chance of Automation
“Section Gang” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Stone Crusher Operator
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Section Gang”
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Clean or make minor repairs to machines or equipment.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Repair or adjust track switches, using wrenches and replacement parts.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Cut rails to specified lengths, using rail saws.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Clean, grade, or level ballast on railroad tracks.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Weld sections of track together, such as switch points and frogs.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
Related Technology & Tools
- Air drills
- Precision files
- Dollies
- Protective ear plugs
- Rail benders
- Hard hats
- Crowbars
- Laptop computers
- Dump trucks
- Light pickup trucks
- Rail profile grinders
- Hi-rail vehicles
- Air-powered wrenches
- Air purifying respirators
- Weed cutters
- Picks
- Rail-mounted cranes
- Fall protection harnesses
- Shovels
- Rail saws
- Handheld computers
- Vernier calipers
- Backhoes
- Safety glasses
- Grease guns
- Pneumatic hammers
- Tamping machines
- Power washers
- Power grinders
- Gas-powered wrenches
- Welders
- Pesticide sprayers
- Global positioning system GPS receivers
- Oxyacetylene torches
- Safety gloves
- Tracked bulldozers
- Shielded arc welding tools
- Spike pullers
- Claw bars
- Track-wrench machines
- Rail tongs
- Grading equipment
- Rail drills
- Jackhammers
- Portable track loading fixtures
- Track chisels
- Hydraulic jacks
- Adjustable hand wrenches
- Forklifts
- Precision tape measures
- Data entry software
- Microsoft Excel
- Timekeeping software