Will “Stone Crusher Operator” be Replaced By Robots? 🤔
89% Chance of Automation
“Stone Crusher Operator” will probably be replaced by robots.
This job is ranked #528 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay, repair, and maintain track for standard or narrow-gauge railroad equipment used in regular railroad service or in plant yards, quarries, sand and gravel pits, and mines. Includes ballast cleaning machine operators and railroad bed tamping machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4061.00
- The Mean Annual Wage in the U.S. is $ 52,810.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 14,250 people on this job
☝️ Information based on the reference occupation “Rail-Track Laying and Maintenance Equipment Operators”.
Also Known As…
- Rail-Track Laying and Maintenance Equipment Operators
- Trackman
- Track Walker
- Track Supervisor
- Track Repairer
- Track Maintainer
- Track Laborer
- Track Inspector
- Track Equipment Operator (TEO)
- Rail Maintenance Worker
- Machine Operator
- Trackwalker
- Track Welder
- Track Surfacing Machine Operator
- Track Service Worker
- Track Service Person
- Track Repair Worker
- Track Repair Person
- Track Moving Machine Operator
- Track Mechanic
- Track Man
- Track Machine Operator Repairer
- Track Laying Machine Operator
- Track Laying Equipment Operator
- Track Layer
- Track Grinder Operator
- Track Dresser
- Slab Lifting Supervisor
- Section Laborer
- Section Hand
- Section Gang
- Railway Equipment Operator
- Railroad Track Mechanic
- Rail Track Maintainer
- Rail Track Layer
- Portable Grinding Machine Operator
- Operator
- Oil Distributor Tender
- Emergency Service Restorer
- Ballast Cleaning Machine Operator
Tasks for “Stone Crusher Operator”
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- Cut rails to specified lengths, using rail saws.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Operate track-wrench machines to tighten or loosen bolts at joints that hold ends of rails together.
- Repair or adjust track switches, using wrenches and replacement parts.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Clean, grade, or level ballast on railroad tracks.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Clean or make minor repairs to machines or equipment.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Weld sections of track together, such as switch points and frogs.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
Related Technology & Tools
- Rail benders
- Weed cutters
- Safety gloves
- Welders
- Claw bars
- Picks
- Adjustable hand wrenches
- Dump trucks
- Pesticide sprayers
- Laptop computers
- Pneumatic hammers
- Power grinders
- Tamping machines
- Spike pullers
- Shielded arc welding tools
- Forklifts
- Grading equipment
- Rail profile grinders
- Track chisels
- Rail saws
- Dollies
- Air purifying respirators
- Oxyacetylene torches
- Protective ear plugs
- Hard hats
- Jackhammers
- Air-powered wrenches
- Hydraulic jacks
- Handheld computers
- Tracked bulldozers
- Rail drills
- Track-wrench machines
- Backhoes
- Global positioning system GPS receivers
- Safety glasses
- Rail tongs
- Air drills
- Precision tape measures
- Rail-mounted cranes
- Grease guns
- Fall protection harnesses
- Gas-powered wrenches
- Crowbars
- Power washers
- Portable track loading fixtures
- Precision files
- Hi-rail vehicles
- Vernier calipers
- Light pickup trucks
- Shovels
- Microsoft Excel
- Data entry software
- Timekeeping software